TON-BSC Bridge you just need to input your BSC adress, you need a metamask, then you go on pancake swap and swap the ton for bnb and you send them on binance
What is your card and OC ?
4 x 3060 Ti = Core 200 / Mem -2000 / PL 110
2 x 3060 = Core 200 / Mem -2000 / PL 100
1 Like
Have you tried setting the mem to 0? Seems it makes no difference, and did find some stability issues on a card when you underclock it too much
Just started mining Ton on 3070Tis Seems like ram can take a break after mining on ETH. Tried with 230w as well but got barely 0,1GH more per card so its not wort. Will try to play more with settings for those cards. Thx for the how/to! Only problem I had, was to use lolminer as ton miner had issues with working at all and had to send funds to hive to run 2nd rig outside of the 4x free on hivepool policy.
I thought I would test out a 6600xt on Danila-miner. I am only getting about 75-80% reported hashrate and coins from pool compared to what my rigs say they are outputting. I have 32GHs and pool reports 26GHs. Things seem more stable with lolminer 1.40 but I wanted to see what danila-miner did for me. On this 6600xt I am getting 1.6GHs where on lolminer I was getting 1.8GHs. Curious if anybody has good AMD settings. I tried what I found online, and the site said should get 1.9GHs with more aggressive overclock.
You can’t see withdraw-option because you don’t have any TONs to withdraw 
Me and many others are using it, too…
ok thanks
So do anyone have find a solution for the problem of the miner restarting all the time ?
Hello. Does anyone found a solution to withraw from the Ton wallet to Gate.io?
Gate.io insists that they don’t need the “comment” to receive the transfer.
By the way, to make swap using the bsc, it takes you a fix ammount of 5 Ton’s plus 25% of the ammount on fee bridge which is not so cheap (I tihink).
Thank you for your comments on this.
There is huge cap between pool hashrate through the bot and the actual hash rate im doing on hiveos im at 3.2gh/s but the bot says i’m at 0.45gh/s …
Ive been mining since 12h and its not updated nor accurate anyone has same issue ?
Im on whalestonpool because tonpool didnt worked at all yesterday will try and keep you updated
Hello how much i get when i found block?
Looking forward to an update mate. I had issues during the night, but as of this morning I’ve not had any issues with the pool.
I do, however, have a 3060 card I need to downclock to 170 core to not crash the miner. Not sure if that could be a reason for your experience of restarts.
After 1 hour i checked with the bot after switching from whalestonpool to tonpool
Hiveos reported 3.2gh/s
Effective hashrate 24h: 0.81 GH/s
Effective hashrate 1h: 0.38 GH/s
Effective hashrate 24h: 0.81 GH/s
Effective hashrate 1h: 0 GH/s
So yeah still an issue 