With latest hiveos update im getting invalid shares with gminer (latest), crazypool is reporting that, hive just detected 1 invalid share, i lowered mem speed then on my 6800 amd.
Anyone else noticing that?
Yellow is the new hiveos update
I can confirm that RX 6800 VDD is now applying correctly on boot on HiveOS 0.6-214@220331, which lowers the power consumption.
No way to apply VDD on boot to RX 6900 XT too, now works perfectly fine after 0.6-214@220331 update. Good job, no idea why newer AMD drivers are not embedded too but at least major bugs were patched
i updated to the latest version too and i’m getting 1-2 invalid shares within 24h period on my 6800 Pulse i tried several OCs and same issue but everything started since i updated to 0.6-214@220403 and i don’t see a way back to 0.6-214@220331 is not in the list of Hive UI.
same here with invalid shares…didnt had before 
I’m trying with this OC now so lets see what happens, if it is still getting invalid shares then we will have to wait for a new version release
2 Likes
ya let us know if it gets better
I had three power phases (220v) at 35a each. After the update, we are now at 30a per phase.
Hi again well after 15h of mining my 6800 Pulse stopped getting invalid shares with the settings i posted before so you can test it and see if works for you 
1 Like
2 Likes
this is Awesome settings. closest to 63 that ive gotten. Thank you!
you are welcome 
Hola Damian, tengo las mismas placas y el mismo problema de temp… por las dudas sabes si hay otro frimware disponible? o alguna otra solucion
Looks like you have everything running perfectly! Could you please confirm your final settings? I have two Radeon RX 68000 (NOT the XT Version) and I tried Overlocking(see attached screenshots Core:1700 Mem:1075) and it only seemed to get a lower hashrate, by about 37 MH between both cards, and it brought my GPUs to a much higher temp.
These are my settings, I hope they can help you
Now I switched to teamblackminer, with the same settings I had on teamred and the result is amazing. At first the consumption increased by 15w, I think I can go down something. For now I have changed for 15 hours and I have not received any errors.
2 Likes
Thanks. can you share 6600xt Setting as well ?
if you have 6800xt setting will be much appreciated.
are you running the latest hive os 0.6-215@220409?
Sorry I was wrong. These are the 6600xt settings. Only mine have micron memories, if you have samsung I think you can do better. For the 6800xt I can’t help you because I don’t have it, sorry
Careful with TBM. Don’t thrust their hashrate displayed in hiveos but check poolside. TBM produces lots of stales and invalids if not configured correctly. They also update very ofte, as in there are still lots of bugs to be resolved, and sometimes updates make things worse again…
Thank you very much, I didn’t notice any invalid or stale actions, but I went back to teamred because with TBM after two or three days the system ram was completely saturated and the system was restarted. I don’t know if it’s due to TBM but with teamred this doesn’t happen
