It locks the frequency. Not sure the actual frequency.
I start with the upper limit, then go down until my hashrates starts to drop
Hi Everybody! thank you very much for the detailed descriptions of your settings and how you tweaked each and every card on your Rigs! this post is very useful!
I have tested many of the configs mentioned here, from core speed settings in offset to absolute, tweaking mem clock. and PL.
Here are the best configs I been able to get for my 3070s:
GeForce RTX 3070 7982 MB · Palit —> CORE 1150 (absolute), MEM 2600, PL 126, FAN 30% (auto)
GeForce RTX 3070 7982 MB · Gigabyte —> CORE 1150 (absolute), MEM 2600, PL 126, FAN 30% (auto)
What I cannot tweak is GPU 4, I don´t know why it keeps below the 60MHs. Been testing with lower core… higher mem speed… but I don´t want to go over 2600 unnecessarily…
Im in hiveon pool with TRex algo
What do you guys think? has this happened to any of you before?
Thanks! Best, FTAR!
Got 1k+ friend requests give me ur username
I’ll help you in DMS will be a lot faster 
Sounds like unlucky silicone, try swapping GPu 4 with an other. then you know if the card is the issue or something else
If your fans speed up slow down… All the time it uses them more then keeping them at 70%
It doesnt speed up and slow down constantly. It very gradual depending on how much your room temp moves. Don’t assume anything until you try it. Set and let it run for a few hours, youll see it find its speed and stay there to maintain temp.
Im more concerned with maintaining the optimum core and memory temps. Thats whats gonna keep ur card hashing for years. The last thing i want to do is throw my GPU in the trash because i was worried about the fan speed moving and not my memory and core temps.
Gpu fans are easily replaceable, good luck changing the core and memory chips.
I’d say silicone lottery was bad on that one.
For your fans.
Set up the Auto fan to 50c temp, then apply it, then go into the Overclocking and set all fans to “0”.
That will maintain a consistent core temp.
I only talk based on experience, a part from that I always have the automatic fan option on so my fans are at 70% but if the temps get too high the fans will go higher anyways👍
Auto fan maintains the core temp, Not the fan speed. Fan speed changes based on the core temp you set.
If your fans are set for 70, then thats manual.
Lol. Smart mode doesnt work like you think.
Thats your problem.
Shut off smart mode and thank me later.
not having any issues and really happy with it for now !
So u like higher temperatures when its hot?..
Lol.
Shut off smart mode. You want a constant cool temp
1 Like
i guess i’ve never been in high temp on that rig so couldn’t tell that was useless
Show me ur temps
What about fan speed, im not allowed to see that?.lol
And your temps dont need to be that low, 50c is fine.
Slow down ur fans and save ur watts and hashrate, depending on GPU.
50c Autofan and shut off smart mode.
Thank me later, ive been thanked before…lol
1 Like
Your attitude is so bad lmao, no you are not allowed to, i’ve showed you my autofan higher you can see they are at 65%
Sorry for trying to help u save ur GPUs…lol
My bad.
You don’t need ur fans running at 65% minimum if your gpus are in the 30s…lol
Smart mode is so smart its making u run almost 20degress less than ur setpoint, it makes no sense at all. …lol
Shut off smart mode and set minimum to 25 or 30%.
And watch ur watts drop off a little.
1 Like