As far as I Know you reach Max mh s for etherum with lhr.
How much power do you have for 46mh s ?
For me they are non lhr. With nb miner you use 75% of the card so with non lhr you should have 25% mh s more
Hello my friend.
I have one 3060ti LHR like yours:
Gainward RTX 3060 Ti Ghost 8GB
Hynix GDDR6 Ā· 94.04.6B.00.F4 Ā· PL 100 W, 200 W, 210
I did your settings but my hashrate is only 31 MH !!
could you please help me to fix it.
thanks
I donāt know which miner you are using, but I recommend you to use T-rex miner or gminer
Hi TON?
I donāt know that
In how far itās more profitable than ETH? I just donāt find TON at whattomine.com
Greetings
Hi Buddy,
Iāve done a little bit research and let one of my rigs mining TON. Iāve included the following screenshot for you: my ASUS 3060 Ti LHRs run perfectly at above 2 GH/s. Another question is: with all the tons of TON in my walletā¦
where do you change them into EUR / USD / BTC / ETH etc.??? OKEx? FTX?
Sincerly, GunZen
Itās even better with less power: I think I finally found what Iāve looking forā¦
Core: 300 / Memory: 2300 / PL: 120
With less power a better hashrate!
try to use Lock Core Value⦠anything above 500 will be considered Lock Core and your consumption will drop further⦠start with 1000 and increase by 50 till youāll find the sweat spot
Uhm, sorry, we were talking about TON with everything above 300 MHz Core the rig didnāt even started to work⦠Iāve already tried it with āthe usual criminalsā like 1500, 1000 and so on
Great job mate!
Power limit is not useless on my LHR 60ti
Lhr cards act wierd.
I set my PL at 125 while using locked core at 1450, and i still get 44-45 mh.
If i remove power limit i get the same hashrate at higer watts. So why would i let it run no power limit.?
No, at Neocrypto for example you can just buy the coins, not sell⦠for me I found out to send the TONs to OKEx and sell them to USDT.
Was using T-rex miner for 10hours or so and didnāt seem too stable so I switched back to Nbminer and it seems like it is a lot more stable so far. I never typically would put my Memory OC past 2800 but had seen someone on this forum due it so I thought id test it on my cards as well. Seems to be doing well so far.
Please give me a Screenshot with the power limit mention the miner as well.
It didnāt work for me, I got Temp error āGPU driver error, no tempsā
But it works very smoothly like below:
Could you please share your OC settings on the hive panel, not the shell?
thank you