Hello everyone! Did anyone encounter such a problem:
I plug-in 1 or 2 videocards into motherboard and the rig strats just fine.
But if I plug-in one more card it doesn’t boot saying “reboot and select proper boot device”.
My config:
CPU: Celeron g3900
RAM: 4GB
Motherboard: ASUS EX-B250-V7
GPU: RTX 2070 SUPER x 3
Hello guys,
When i restart the system always get this error: uncompression error --system halted. After 10-15 restart it’s boot normally. What is the problem? I tried 2 SSD, 1 HDD and 3 USB Drive. My motherboard is Esonic H81 BTC-King. Ram is 8 GB DDR 3 1333 MHz. Thank you!
I changed ram, problem is solved…
HI,
I have a problem running HIVE on one of my computers.
Motherboard: ASUS M2N
Processor: 64 X2 Dual Core Processor 3800+
Is it possible that this kit is too old?
Any ideas?
Please help.
It’s seems like there is error (damaged) on disk surface. Try boot flash and boot from other storage
Hi All,
Having an issue booting GPUs, hoping someone can provide some thoughts.
I have a 6 ASUS Dual RX 5600 XT build, with a MSI Z390a-Pro MB, Intel i3 9100F CPU, 1 16gb DDR4 RAM, and have been attempting to power up via SSD flashed with the Stable HiveOS.
Upon power up, the MB will run through the sequence and the EZ debug LED’s all go out, the GPUs all kick on, but once the MB gets through all lights, the GPU fans all turn off but power remains (lights, etc.), and they are not being picked up in my Farm.
I’ve tried to get a monitor on the GPUs, but screen acts like there’s nothing there. Any help is greatly appreciated.
The same thing happens to me, did you find a solution?
[image]
Hello, Can someone advise me what to do?
My rig was running just fine for a day, finally. I have no GPU bios modification I ! set the recommended overclock/ undervolt setting for stock rx 5700 xt. Then It shut off and I only got black screen after the BIOS settings. I took the motherboard’s battery out reset the Bios setting for my Asus b250 mining expert, hopefully good as it can be( happy to take full configuration from anyone!). Since then the black screen gone but now I have a different issue, which I do not know how to fix it.
Please see the pictures attached!
Установил новый риг из 12 видеокарт. Но при запуске полетного листа на монете ETH и майнере nbminer 37.1 и 36.1 пишет невозможно скачать майнер. Мой логин Naserig4 ферма rig4arm риг sasa2. Помогите, пожалуйста.
i have the same question ，someboy help us
same question 。need help
motherboard biostar tb360-btc
cpu i3 8100
4G ram
try csm/legacy mode ，then it’s go nothing
another rig also use tb360，it can run
Hi
new devices … new problems.
got 5 new miners, with until not known mainboard. GPU are RX580 8GB elpida (chinese cheeep cards with 1 hdmi)
flashed hive image with flashutil to internal ssd & after reboot they all panic like this:
(bios is on stock defaults)
i can access the miner on console if i do start recovery mode, (so miner dont start & gpu drivers not loaded)
what can i try to get them running?
Hello
I bought a 6700xt card and after connecting it to rig, it no longer boots, and only displays the asus logo, does not enter the motherboard BIOS, and the system hangs.
I removed all the other gpus and connected the same 6700xt gpu directly to the pcie x16 without a riser, but the problem remains.
Motherboard asus b250 mining expert
cpu g4400 intel
ram ddr4 8gb
rig works well when this 6700 gpu is not connected.
Hello everyone. I write the .img image in DD mode to a USB flash drive. But when I boot my computer, I get the message: reboot select proper boot device and etc, why problem?
Motherboard in BIOS. Socket 775
I have the same problem, let me know if you find something please !
