Hi,
the rig has been running with these parameters for days (but on lolminer). I imagine it will remain stable with teamblackminer. I will tell you 
And on my sapphires, it gives that
i m really happy 
thanks
System crashed last night, not sure why. I didn’t have the watchdog on to reboot, it is now.
I have been running the shown settings for months now, the only difference is I switched from NBMINER to TEAMBLACKMINER recently. Hash rates went from 32.xx to 34.xx
1 Like
Team Black Miner in lying about the hash rates though
Hive Shell
And my 3070s in gminer are besting TBM with less hash power
1 Like
how to get less number of valid/accept shares, with a total hashrate of 140 mh/s which is much higher than 2x 3070 (gminer) 124 mh/s ??
are you running at the same time? if a very large difference is suspect
Running dual flight sheet
Team Black Miner
4 x 6600 XT
138.9 MH
gminer
2 x 3070
124 MH
Heaps of stale shares with TBM but no invalids thus far after 9 hours
1 Like
Hi @Lukezen @TheArea51Rider @natsou_k
I’ve tried using teamblackminer (TBM)
with a higher hashrate, do you feel the difference in the shares you get?
I feel there is no difference at all.
share what I get is the same.
do you feel the same after using 24 hours?
can you tell me about your experience using TBM for 1 day?
Honestly, I’ve only been running for 6 hours, but there’s no significant change.
TBM has now gone passed the 2 x 3070 like it should due to higher hash rate
I think I’m differently ahead
With all cards using gminer my shares per minute is around 3 ish
when using dual miner flight sheet and add TBM and gminer shares per minute together I get shares per minute 4+
1 Like
Hi, I don’t know yet.
TeamBlackMiner seems to display a larger hashrate on hiveos, but on the pool it is no different from any other miner (lolminer for example).
I’ll let it run for a few days to compare. I will come back to the forum when I have numbers.
1 Like
Where are you finding those stats?
Here’s my info, website data and screenshot of the actual TBM miner running. I am still learning about interpreting some of this data. I am guessing the percentage on the far right is percent of valid shares?
2 Likes
Yup
try my setting… same hash power less actual power
I just found out why numbers like TEMP, FAN, CORE, MEM, WATT on TeamBlackminer are all 0 ???
is this a bug?
I’m using hive os version 6-210@211010
here I have run almost 24 hours, but I do not feel a significant difference with the normal hashrate of the RX 6600 XT 32.5 mh / s.
should be with a higher hashrate like 34.5 mh/s I can see a big difference, because I’m using 8 VGA, running simultaneously.
teamblackminer 22 hour=
I compared with the journal, when I used the RX 6600 XT with a hashrate of 32.5 mh/s, it didn’t make a difference,
I actually lost, because the wattage is much higher with a deceptive hashrate.
teamredminer=
can you give an assessment so far in using teamblackminer?
do I have to upgrade the hive os version if I want to get maximum results?
thanks brother @Lukezen @natsou_k @TheArea51Rider @stanno117 @Batfink @HaloGenius
My guess, 6600 must not be completely supported yet (new card)
First crash today after more than 24 hours without issue prior
one more and I’ll go back to gminer
1 Like
I’ve been running the team black miner for a while now. I got good results after changing the pool to 2miners.com and use --xintensity 700. I see a poolside profit increase of around 5%.
1 Like
Haloo
why did you go back to using gminer?
is gminer better than teamredminer?
can you explain the reason? Thanks
Flexpool, etheremine and the hiveon pool pay nothing for stale shares, so changing the pool is your only option. Upgrade to the latest version of hiveos and run team black miner v1.22
I haven’t yet
One more crash and I might
1 Like
Halo @aids
as long as I am mining on ethermine, I have never experienced stale above 5%, at most only 3% after that it returns to 0-1%.
what is the effect when using TBM?
when using TBM, must use a pool of 2 miners, to be able to get maximum results?
Thanks
intensity setting are for workload tweaking
if you’ve got more than 5 GPUs it can make a big difference
it stops the GPUs trying to use \ work the same resource at the sane time
example for my 6 x 1660 Super rig setting
1 Like