Hi Edwinst,
Could you please send me your “flight sheet” configuration for teamredminer?
I dont know what to put for “pool url”.
Thanks in advance
Ben.
Hey edwinst31,
I also had the no temps detected errors.
What did the trick for me, as i mentioned in my post, lower the memclock on one xfx card by 1 MHz to 1134.
Rig is now running for 5 days straight w/o any reboots.
The card does not like higher clocks.
You guys may need to figure thatbout card by card …
I solved all my problems (for last 16 hours) by switching MB to BTC-D37. And using TRM instead of LOL or GM
I’ve tried setting overclock/underclock settings but still result is always error “GPU detected error no temps” (if I use the latest version 209/210 (beta)).
I even changed the motherboard to the S37, still GPU error was always detected error no temps,
I don’t know what to do? can you help me?
----+
but my problem will be solved if i use the stable version 208, i undrrvolt up to 640 VDD the result is always smooth, i try for 3 days no restart/error at all.
My problem if i use latest version (beta 209/210) for 6600xt.
Please help me brother 
picture above if I use the stable version @208, stable is no problem but the hashrate is locked at 28 mh/s
640 VDD should be good, try 800 as a starting point for VDDCI. I run 700 VDDCI on all my cards with 1300 MVDD.
Halo actimelis
how much VGA are you using?
what version of hive os are you using?
did you enter one by one into the PCIe slot?
did you input all of them and set the OC at the same time?
can i see your screenshot on hive os page as a whole? because I bought the same motherboard as you (S37)
Please help me brother
Hello bro
how much VGA are you using? what version of hive os are you using? did you enter one by one into the PCIe slot, did you input all of them and set the OC at the same time? can i see your screenshot on hive os page as a whole?
Please help me 
how do you start from setting core clock?
1100 core clock or memory clock??
How about VDD/VDDi ? Blank??
Started with 955 / 630/1270 /1100
And then changed memory core
If anyone knows what I could possibly be doing wrong I’d appreciate it.
The Nvidia 1060 mines fine. The 6600XTs are detected but no matter what flight sheet settings I push it does not mine on the 6600XTs.
use 1100 - 700 - 1140 for stock and you will be running 
1 Like
Thanks for the help, I actually got them running by resetting the OS and setting a new password.
700 for what??
Core voltage or memory core voltage?
Please share your screnshoot
how much vga are you using?
what motherboard are you using and what version of hive os?
can i have a clear screenshot of your hive oa page??
Thanks bro
I’m using an ASROCK Z170 OC formula MB. I actually n eed to get a dedicated mining board. The pci lanes are full and I have 2 more cards not mining another 1060 and a RX480 because there are not enough lanes. Settings in OC are this
try turning off your rig, and turning it on again, is it running normally or should it crash when booting?
do you use SSD to boot hive OS?
may i ask for another update regarding your problem?
in these few days do you still encounter problems like restart/crash will boot?
or is it safe to find no problem at all?
do you still use lolminer or switch to teamredminer?
I want to ask again
did you install to the SSD using the stable version 208 or using the beta version (209/210) ?
or did you install the stable version (6-208) on the SSD first, and update to the latest version automatically on the hive os page?
I really like your explanation, because you explain in detail about your problem.
that really helped me 
Hi edwinst.
For teamredminer, I await your answer to my question (posted above), For the configuration of the flight sheet. (then i still using lolminer, i will test teamred when you will answer )
I haven’t had any problems for 4 days (4 days without reboot).
And be sure I had the same problems as you. This is not a concern of mem, because even disabling the overclock on the crashing card, it kept crashing.
For the ssd, I first updated hiveos on my usb key. and then i transferred the OS to the ssd.
Here is the link to do it very easily.
Ben.
1 Like