wowww good MH and wattage 
can show the template please ?
What miner did you use? I use Gminer and got constant at ~63.7MH
Team Red Miner, idk how configure another miner :’(
if i put to GPU 3 or GPU 5 Same OC , mHZ decrease…
selam mustafa bol kazanclar
Probably add more voltage and memory clock but that would increase wattage too.
Here is my result on 6800XT x 6 using Phoenix Miner v 5.4c
On 5.5 and 5.6 cannot detect 6800XT and if I use 4.5, the accepted shares are too low.
Normally does 63 to 64 Mhs
hello, show your card settings, consumption is low and hashrate is high, I am interested in the version of drivers and settings
1 Like
Has anyone been successful in decreasing the 6800xt wattage (in hiveos and confirmed at the wall)?
I have my Reference 6800xt stable at 63.4Mh, but it takes 150+ watts. seems like changing core voltage is pointless and does nothing.
Mustafa you sir are the man! I am using those settings on my 6800 xt and I got a jump up to 61.57 mh. I also set the power level to 125w in the settings you had your blank and it’s showing 122w for you for some reason. In addition, would you recommend the same settings for 6700 xt? Thanks in advance man.
Hi there,
Can anyone help to reduce the Temp for RX 6800 XT card? I have used the recommend setting from this thread and others are getting much lower temp as compared to mine.
I am using TeamRedMiner.
Thanks in advance for your help.
6800 xt in niveos does not work stably, always one card with a low hash rate, and after a reboot there may be another!
hi guys,
I’ve tried several config in this thread, I managed to lower the watt but the temperature is still high.
would anyone suggest what config I should use to lower the temp?
Hey there! Can you share your config for those cards?
I am having issue using Phoenix v 5.4c…it is giving memory error, so I am using TeamRed Miner for AMD RX 6800XT and I am getting around 61 Mh/s. These settings looks good…would you mind sharing the settings?
Thanks
Hi Guys,
I have tried so many different combinations of OC on my Saphire 6800 XT cards and they are not giving desired results
I am using HiveOn Pool with TeamRedMiner for dual mine ETh+Zil (Extra Config Config: --pool_strategy=min_epoch)
PhoenixMiner isn’t working with latest version and V5.4c isn’t giving stable hashrate
Also if few of you might not be aware that there is a switch on AMD cards for unlocking OC which is turned on in my case
With memory 1075 my cards are going dead after an hour or so and Rig restarting but no Rejected shares with 62.3 Mh/s… So i am testing 1060 now with less hashrate
