GPU 0 is Sapphire Nitro+
2 weeks without problems with this OC, The apparent power consumption on the motherboard is approximately 458 watts, but the total actual power consumption measured with the smart plug is approximately 672 watts per hour. Miner: Teamredminer
1 Like
I can never lower the power consumption. It does not accept the OC settings I entered.
Gigabyte Aorus Elite 6700 XT
the worst vendor ever
Hi everyone 
I used onur1 OC and get a pretty cool Hashrate for the Micron 48.96 Mh(Micron GDDR6 · 113-V398MECH-1OC) like you but for the other one, a Samsung one (Samsung GDDR6 · 113-V398MECH-0OC) I’ve tried many many different setup and never can get over 45.42 Mh at best !
Any idea ? or the Samsung one are known to be maxed or something ??? Thanks
I use lolminer
1 Like
Beware of the heat !!!
ım Glad to help you Can you try team red miner?
1 Like
Reflash hive for latest amd drivers.
6700xt strix for this
But I think with slightly higher voltage/soc settings you can get pretty close
1 Like
if you GPU is rebooting, then it is not stable. Try to lower the OC
1075 is the absolute max memory setting possible, your GPU may not be stable there for a number of reasons. Lower the Memory setting.
1 Like
Anyone here experiencing this? Quite a significant drop on wattage and is constant.
6700XT MSI Mech 2x cards.
These are the settings I have got configured. Any recommendations?
Thanks! Im giving this a shot on my 1 6700 XT MSI Mech with Samsung using TRM. Hashrate initially dropped a few tenths but the wattage seems to have significantly dropped. Have you gotten any GPU DEAD errors with these numbers? Currently sitting at 46.4 mh/s stable 81w in Hive.
1 Like
здарова вем,купил я на олх карту 6700 павер колор на памти микрон,и теперь мучаюсь,перепробывал много настроек по розгону.выдает 120 ват и от 46 - 50 мн но через время показует 97%ефективности и вырубается.
isn’t your memory clock too high?
