changed to NBminer and everything is running stable now 24h tested.
vramlariniz yanıyor oc ayar baska kullanın
bence
SWEET! let me know how it goes or if ya have any problems,im gonna try the same thing
running smooth, just power consumption is a little higher than TRM but just 3/4w per card so i dont worry
never get invalid shared, never get gpu detected dead
Can people that are running Asrock Challenger 6700 XT and Asrock Phantom Gaming D 6700 XT share with me their BIOS versions (and if you had a new bios the actual file) and settings?
Both of these cards reach crazy temps when run at 1150 core /700 vdd / 700 vddci /1260 mvdd / 1075 mem.
My bios versions are:
Challenger: 113-EXT800254-L04
Phantom: 113-EXT800230-L01
Running 6 challenger (non-OC edition) here, I’ve tried almost every OC (using TRM-NB) I found here, but none gave me at least these many hours of stability, so at minimum I’ve found my base entry point for overclocking… Temps looks ok, dk if i they can do it better though.
Gotta setup a 6700 brand mixed. (x2 XFX, x2 MSI mech, x2 Asrock challenger OC edition) will update what I manage to do there too.
Regarding temps, the only card that I found shitty about it was a 3 cooler gigabyte I’m currently using on my gaming setup.
Thank you, these temps look great but the cards are getting quite a low MH. Can you try one at my settings above and see a) is it stable for you? b) does it go crazy hot?
I am actually using gminer due to the lower fee.
thanks
hows it doing?
just fine pretty much stable with nbminer no problems at all
Hey, could you please tell me which miner are you running those OC settings, and how stable are they for you?
Hi, I’m not much of an expert either. But I am using the attached Oc settings for my Rx 6700 xt cards. I haven’t had any problems for about a month. I am using teamredminer. hopefully it benefits your business. Good luck with.
Note: I change the Auto Fan setting from time to time. Between 40% and 60%.
1 Like
Hey firstly I would use the same over clock settings I have in the picture except my fan settings (which are auto), if this doesn’t work I would set up another miner and use team red miner just for the amd cards.
Once you set autofan settings you shouldn’t then need to change the fan speed in the settings, it should change on its own
1 Like
Your core is too low. You need atleast 1250mhz on core to have better hashrate.
And try phoenix miner
1 Like
This tip i got from internet was that core must be over 1250 for 6700xt to get good hashrate. Phoenixminer can go up to 47.3-.4. And use this commandline -clKernel 0 It will help alot.
How stable? I had used phoenix before, and stability couldn’t last for more that 6/7hs. Using same oc but different miner (TRM/T-Rex) got my self to pretty similar hash rate but long term stability.
