Hi akosi and Adipras,
I have the same type. It’s MSI. What bios to use?
Found Card: 1002:687f rev c1 (AMD Radeon RX Vega 64)
Chip Type: Vega10
BIOS Version: 113-D0500150-102
PCI: 06:00.0
OpenCL Platform: 0
OpenCL ID: 2
Subvendor: 0x1002
Subdevice: 0x6b76
Sysfs Path: /sys/bus/pci/devices/0000:06:00.0
Memory Type: HBM
Memory Model: Samsung KHA843801B
Thanks
With your settings @akosi my Gigabyte keeps shutting down the whole rig.
So therefore it seems these settings doesn’t work for Gigabyte Vega 64 flashed to Vega 56 Gigabytes.
Sad 
Hey dude
Got some problem with my Gigabyte Vega 64.
Flashed it to Gigabyte 56 and does not run well. Can I flash it to a Vega 56 ref card (MSI) no riks of bricks?
I’m not real good with flashing only did my 64 with guidance from here, first time i bricked a bios and thankfully got it recovered
What BIOS did you end with? I can’t find anything over 150/165W and I have the same device id / subsystem. Please share.
Hey all, I am currently running three Vegas one of which is a 64 flashed down to a 56. Two of the three run in the 185-190 mhs on autolykos with no problem. One is a 56 that I can’t get over the low 170 range. It’s a XFX Radeon RX Vega 56 or it’s listed as the dual dissipation one in the list of bios. It constantly runs at a way lower clock that I set and I can’t figure out why and I’m wondering if it’s the bios of the card and if I can flash it to another bios to maybe get it to run better. I attached the amd info from the card for reference. Any suggestions are appreciated.
This memtweak dont work for me? U use vega 56 bios on vega 56 and how much get mhs?
Has anyone been able to find a vbios for the Sapphire Vega 64 card with ID 1002 687F
1002 0B36? The only Vega 56 vbios available are 150 or 165W. No 220W to be found unless I go to other subsystem ID’s.
EDIT: in case anyone is wondering for this card ID, I went a head and flashed a 165W vBIOS, specifically the one linked below.
VGA Bios Collection: Sapphire RX Vega 56 8 GB | TechPowerUp
Getting 54 MH/s at 118W, using the OC and straps OP posted in the top post.
Hey guys, does this apply apply for a windows rig? I’m mining on my gaming pc and want to flash the vega56 bios but just unsure on if the steps and compability of this guide apply for windows? Thank you!
i tried using this bios too. but got notification like this
did u find bios for this ?
bro can u send me ur Bios stock link ? i tried failed Bios
can you post your device id.
or brand name and gpu version.
Thanks so much for this my man! these cards are gems
Sorry its been a while since I’ve been able to give mining any attention I used this bios for my vega 64 but mine also has a water block on it now, was a reference / blower
113-D0500300-102
Hi. I’m looking for the bios for my MSI vega 64, which looks to be this one :
I can’t find the good vega 56 vbios to flash my card, can you help me please ?
Thanks by advance. 
@akosi best thread so far on Vegas I can find out there… Appreciate your input. Just got hand on a lot of Vegas 64 and was hoping to tweak them before deploying into mines.
Seller did not have boxes. They don’t say Sapphire or MSI. I do have the screenshot from GPU Z that I ran today. I will be running them on hive however. Any suggestion for what BIOS rom for Vega56 should I flash?
How? how are you able to reach 200MH on a single Vega 56!!!
You can’t anymore. The last update TRM came out with to fix the new ergo settings knocked all the cards down to the 140 range now. Used to be 190-210 pretty easy depending on the card.
Yeah. Sadly. And if you use the old teamredminer it will not give you valid shares.
