Unable to Dual mine Eth+ton on vega 56/64

Mugenlude · February 7, 2022, 5:27pm

I also have tried the --maxdualimpact parameter without luck.

My Vega 56/64 rig (all running 56 bios) will run 3 of the cards for about 5 minutes then crash; and when it is running the ETH hash rates are lower, and TON hash rate are all over the place.

Is anyone successfully running on Vega cards?

Benthebrewman · February 11, 2022, 1:26am

I have had no luck either. I get them to start mining every once in a while but they all crash quickly. Can’t figure it out at all.

kastyk · February 11, 2022, 3:15pm

TeamRedMiner new release with ETH+TON dual mining is already available. Moreover, developers say:

Vega and Polaris support for dual mining be released shortly.

So, patience - soon Vega owners should be able dual-mine using their GPUs

tasma · February 20, 2022, 5:46pm

Looks like it is working on Vegas.

I started with --dual_intensity=0.5 so it is not full power for sure.
ETH hashrate stays the same. Power usage went up for about 40-50W per card.

kastyk · February 20, 2022, 5:52pm

Yes, it is. Below my screenshot. Set up just today.

Zr7s · February 20, 2022, 6:21pm

Any specific timings or just leave same as eth?

tasma · February 20, 2022, 6:27pm

I left the same and let it work for few days to check if it is stable.

Zr7s · February 20, 2022, 6:43pm

You all running teamredminer? I don’t see the option to dual mine with it and I’ve updated everything to latest? I’ll give it a try

tasma · February 20, 2022, 8:00pm

Configuration is similar to ETH alone (I mean coin ETH, wallet for eth, teamredminer etc.). The only difference is in Extra config arguments. You need something like this:
–ton -o stratum+tcp://tcp.whalestonpool.com:4001 -u EQCBbC6WItFzvfWfgRExxxxxxxxxxxxxxx.xx -p x --ton_end
–dual_intensity=0.5

Zr7s · February 20, 2022, 8:02pm

Here’s what I’m getting straight, no lower intensity, I only lost .04eth mhs
Keep in mind this is a water cooled vega 64 w vega 56 bios

ymnsrkn · February 20, 2022, 9:38pm

Hello,
Can you share the eth+ton pool template image?

moty · February 21, 2022, 2:14am

same here,just not work,only eth /only ton but no dual

Zr7s · February 21, 2022, 2:24am

teamredminer
If your on Whalestonpool you can just paste this into extra commands box
–ton -o stratum+tcp://tcp.whalestonpool.com:4001 -u walletaddress.rigid -p x --ton_end

Change Wallet address and rig id to your own

tasma · February 21, 2022, 7:20am

moty · February 21, 2022, 1:44pm

thanks man, the problem was the oc!

Mugenlude · February 22, 2022, 3:57pm

I was able to get running on TeamRedMiner as well with 3 changes from my normal ETH settings:

lowered Core Clock by 25 on my Vega56 (GPU0)
lowered Core Clock by 50 on my Vega64s (GPU1-4)
add --dual_intensity=0.5 to ‘Extra confing areguments’

afargo · February 22, 2022, 4:47pm

I started mining with my Vega 56/64 rigs yesterday. Lost 2-5 mh/s per rig (8x gpus each) and am getting around 1.1 gh/s per gpu. I didn’t change any of the OC settings, and power consumption has increased significantly.

Mugenlude · February 22, 2022, 5:23pm

Power consumption increase is normal, that is the cost of mining the TON. I lost ~1 mh/s across 5 GPUS.

sagjhebbal · February 22, 2022, 6:56pm

I can not manage to start it to mine .What am I doing wrong?
Screenshot 2022-02-22 at 19-54-23 koparka1 undefined undefinedundefined - marszpot farm (marszpot)

Benthebrewman · February 23, 2022, 4:44pm

Try --ton_start not just --ton