I did that but I still get 0mh/s on one card and on my other mining rig with 4 cards ethereum starts hashing but ton never starts. ive tried --maxdualimpact 25.0 up to --maxdualimpact 30.0 but still no luck
I also have tried the --maxdualimpact parameter without luck.
My Vega 56/64 rig (all running 56 bios) will run 3 of the cards for about 5 minutes then crash; and when it is running the ETH hash rates are lower, and TON hash rate are all over the place.
Is anyone successfully running on Vega cards?
I have had no luck either. I get them to start mining every once in a while but they all crash quickly. Can’t figure it out at all.
TeamRedMiner new release with ETH+TON dual mining is already available. Moreover, developers say:
Vega and Polaris support for dual mining be released shortly.
So, patience - soon Vega owners should be able dual-mine using their GPUs
Looks like it is working on Vegas.
I started with --dual_intensity=0.5 so it is not full power for sure.
ETH hashrate stays the same. Power usage went up for about 40-50W per card.
Any specific timings or just leave same as eth?
I left the same and let it work for few days to check if it is stable.
You all running teamredminer? I don’t see the option to dual mine with it and I’ve updated everything to latest? I’ll give it a try
Configuration is similar to ETH alone (I mean coin ETH, wallet for eth, teamredminer etc.). The only difference is in Extra config arguments. You need something like this:
–ton -o stratum+tcp://tcp.whalestonpool.com:4001 -u EQCBbC6WItFzvfWfgRExxxxxxxxxxxxxxx.xx -p x --ton_end
–dual_intensity=0.5
Here’s what I’m getting straight, no lower intensity, I only lost .04eth mhs
Keep in mind this is a water cooled vega 64 w vega 56 bios
Hello,
Can you share the eth+ton pool template image?
same here,just not work,only eth /only ton but no dual
teamredminer
If your on Whalestonpool you can just paste this into extra commands box
–ton -o stratum+tcp://tcp.whalestonpool.com:4001 -u walletaddress.rigid -p x --ton_end
Change Wallet address and rig id to your own
thanks man, the problem was the oc!
I was able to get running on TeamRedMiner as well with 3 changes from my normal ETH settings:
- lowered Core Clock by 25 on my Vega56 (GPU0)
- lowered Core Clock by 50 on my Vega64s (GPU1-4)
- add --dual_intensity=0.5 to ‘Extra confing areguments’
I started mining with my Vega 56/64 rigs yesterday. Lost 2-5 mh/s per rig (8x gpus each) and am getting around 1.1 gh/s per gpu. I didn’t change any of the OC settings, and power consumption has increased significantly.
Power consumption increase is normal, that is the cost of mining the TON. I lost ~1 mh/s across 5 GPUS.
I can not manage to start it to mine .What am I doing wrong?