Cool bro. 10% increase is quite nice. Right now, I notice that I can select T-rex 0.24.0 in flight sheet. But somehow the default version (latest version) is still using 0.23.2. This is kinda weird.
Thats AWESOME!
Can you let me know OC setting of your 3060ti Samsung, and actual parameter of t-rex?
(Appreciate if you can share me 3060 OC setting and actual parameter of t-rex as well)
I’m sorry to ask alot.
I just manage to stably pull out around 95% capacity on 3060 12GB LHR V2
15MH ETH = 30% of 50MH full capacity.
15MH RVN = 65% of 23MH full capacity.
Here is my OC & driver running this rig, Stable for 17 HRs now.
2 Likes
Here are the results of 3060TI [ Samsung Mem ]
3060 TI seems to be a lot more unstable than 3060, my assumption is because of low Mem capacity, should be better in a further update.
The ideal Hash rate is supposed to be.
20 MH ETH = 30 % of 60 MH full capacity.
19.5 MH RVN = 70 % of 28 MH full capacity.
what I got fluctuate from 20 to 15 for both coins. but 24 hours outcome still beat single coin mining on all coins around 1x%.
1 Like
The perfect combination should be ERG + ETH because both are locks from LHR.
But from my testing with dual mining both locked coins, LHR algo seems to be very aggressive. Can’t manage to run stably even for over 30 mins, so I just go with easier pair ETH + RVN.
Will wait for further update from the dev.
1 Like
Thats fantastic!
Thank you alot!
Hey man, i coudn’t get any ETH hasrate even though i followed all of the steps for HiveOS. Why do you think that is? Thanks for advices in advance.
Change “kawpaw” to “kawpow”.
Everything else looks ok to me.
I test T-rex on 3x3080TI mining ETH+CFX. Here is screenshot:
Both hashrates fluctuate. Eth in range 29-41 while CFX in range 69-82.
Overclocking doesn’t look to have influence on hashrate. It doesn’t matter if I set C1140M2700 or C1500M3000. The only difference beetwen these two is power usage.
Nice info. Thanks! I have questions.
-
Your overclock profile is aiming toward the algo1 or algo2(lhr_algo)? Let’s say If I want to dual mine eth+erg, which overclock profile should I use, eth or erg?
-
Does the order matter for algo1 and algo2? For example, is eth+rvn and rvn+eth will have the same result?
Thanks in advance.
- From my testing OC aim for a more difficult coin. For example for ergo which is a very sensitive coin, we should find the OC parameter for each card for stable single Ergo mining first before Dual.
If ergo LHR trigger, will also trigger ETH.
For Eth + RVN we aim for eth, because rvn didn’t trigger LHR.
- Order doesn’t matter, I tried set flight sheet for rvn and add extra config for Eth miner still behaves the same.
Cheers
1 Like
Yeah I think ETH+CFX pair is way more stable, now testing on 3060 LHR V2.
hi
noob questions
Where to find “url2” ?
it’s out adress ravencoin for exemple in “user2” ?
Thanks
This is pool address where you want to mine RVN with exact port. If you have flightsheet for mining rvn you find it there. Check Server URLs
thanks a lot man. work good now
yep exactly thanks !
Thanks for the Info about the 24.2 version I just did thse command modified and it work! Have fun…
cd /hive/miners/t-rex/
mkdir 0.24.2
cd 0.24.2
wget https://github.com/trexminer/T-Rex/releases/download/0.24.2/t-rex-0.24.2-linux.tar.gz
tar -xzf t-rex-0.24.2-linux.tar.gz
cd …/0.24.0
mv t-rex t-rex.old
ln -s …/0.24.2/t-rex .
I have the same issue and I may be just dumb but how does one go about correcting inverted commas? I tried to type it out in a word doc while being able to see the proper orientation of the commas and then copy paste to hiveos but still get the same error.
is 0.24.2 not available on hive yet through system update? i just updated yet miner is still running 0.24.0 (i want to use the lhr-autotune-mode :D)
