is anyone here mining TON coins using the RX 6600?
if so, I’d like to know what settings you use to mine TON, especially miner , pool and OC.
thanks
Hi @Batfink ,
Your 901 core trick works. I’m mind blown… but how??
Now my 6600s consume less than 40w. I think it’s time I start reducing SoC VDD and see if I can get the power consumption any lower. Thank you very much!
1 Like
Thx you bro im 30.04
Xfx 6600
Tested this config, its working stable.
Only one powercolor card i cant do this config, if i change de OC the GPU goes dead.
But its OK, thanks for the help with the SoC Freq and SoC VDDMax
ooooh…that looks super nice! 
Just a helpful hint to simplify your OCs; Set MVDD = 1100 for all RX 6600 with Hynix memory (You can put whatever you like in the GUI but it always uses 1100)
cat /var/log/amd-oc.log
Have you tried SoC Freq = 534 on the naughty GPU?
I bet that is a super efficient rig.
I tried many configs in this GPU, now im tired to try anything, so many reboots.
But the rig runs smoothly, many days without failure or reboot! I realized that the rig with at most 6 GPUs had a nice hardware consumption, when i started to use more GPUs, the hardware consumption gone up, more than i had thougth would do, but this i will analise other day. Will do the test with the problematic GPU tooand try the SoC Freq you talked about. Thanks
how about SoC setting? Voltage and Frequency?
I’ve got a bunch of RX6600 and a few 6600XT. If you read all the posts here you’d be able to squeeze every Mh/s from your RX6600/XT mining ETH but I’m banging my head against the wall trying to bring the power consumption down mining TON Coin. The second day, crash after the crash… Has anyone got better results?! Lol miner | TON Whales
.
Here’s what settings I found here and they seemed to be working just fine:
RX6600: Core 2200 | 875/800/1100 and 875 MEM
RX6600XT: Core 2275 or 2300 | 875/800/1300or1250 and 0 MEM
If you do 850 on core voltage for 6600 it seems to be fine (besides one card in my case for no reason). Would really appreciate any input since I’m already at 840w at the wall.
1 Like
I’m currently trying to get my 6600 to do Ton Coin as well, same issue it’ll run for an hour then crash. I’m trying 2200 core clock and everything else stock.
So far having good results with my XFX and PowerColor cards with these settings. Anyone able to get the XFX to run any lower power?
Hi @Hilbe and welcome!, you can drop core to 901 and get lower power consumption (37-39w) but hashrate will drop to ~28.95
What are your SoC settings?
[I have three of these XFX]
No, not 900 use 901 (it does make a difference)
Sorry, what miner are you running on what coin? (ETH I assume?)
Updated to 901.
ETH with Gminer. Keep switching back and forth from TRM and Gminer lately. Get more shares and higher MH/s with Gminer from what I’ve seen.
I can’t comment on Gminer but the hashrates look good (I use TRM).
Try Soc Freq = 534 and VDDMax 850 to start with
- if you go 13 days back up this thread there is some info on SoC settings and where to start.
[do a reboot if things look good just to get a clean slate]
I got these XFX 6600;
There is an issue with GPU7 hashrate but I am reluctant to screw with it because of this 
Hello! who can answer me , gpu 5 its a renegade girl! i cant raise memory hight than 900 and that oc gets that mhs i cant understand.
