@zxxTheDragonxxz It ran stable for about 18 hours then I get this new error “Autofan: GPU temperature 511 is unreal, driver error”. I set the fan control at 80 and got the same GPU detected DEAD error. I’m not sure if it was the fan this time though. Is yours stable at those numbers?
511 is often too high oc or bad riser
Thanks, @Smining570. I tried switching risers but they’re still the same kind. I’m thinking to get new ones and try that. Besides that, no OC seems to be working. The most I’ve gotten is 6 hours before the restart and then it just keeps restarting.
I noticed your powercolour is also GPU0. Next ill try to swap out the card positions on the motherboard and see if that works.
just in case u dont know, get the lates vers risers 009s. Hope u get it back up stable.
#edit#Btw. im not familiar about those nvidia gpus requirements regarding autofan, but i stopped using autofan few months ago when i was getting 511 all the time, havet seen that error since…
the problem is that mine will always be the 0 cause i dont have more amd gpus in my rig 
Awesome. I’ll try those. Thanks.
Do you mate a bios mod?
ref 30 usually, sometimes 50…but that dont make any big difference…some 580´s dont like even ref 30…just spitting invalids 
here i tried to switch the miner but it gets even worse rebooting after 5 hours.
what is your whole setup with all oc 's? 580"s should be solid for longer ops…
switched back to teamredminer @Smining570
It used to works with ref 30 now i am testing ref 20.
But i never get past one day without the 580 rebooting the rig.
I am using the 009s riser an msi gaming plus max x470 , athlon 3000g paired with 16gb of ram and a xfx 750w power supply.
are u sure its 580 that causes reboot, if one of others “dies” it may be that the error is gpu0 dead when it reboits. have u ran 580 only for longer period? your values are fine, might as well drop vdd to 840 if Core 1150,im running 580’s now Mem 2060 vdd 840 core 1190 ref 30. these gives some invalids, usually on same gpu, xfx 590…but safe are for me 2140/840/1170 ref 30. these runs without any issues for days… usually i rise them ro higher values at some point then to the ones i mentioned earlier… 
. and back again to stable when there is enough invalids. really hard to say what can cause Re oot after several hours… psu? Let us know how it goes with ref 20.hope it helps or u find another solution.
1 Like
i’ll keep you updated, the other two are in the t-rex miner, the error that i am getting is in the team red miner , could be the nvdia cards ?
Yesterday i tried in the phoenixminer and i saw when it happens suddenly the hashrate from the 580 goes to 0 and the other two keeps hashing until the phoenixminer reboots cause rx was reporting as 0mh/s.
I tried 2140/840/1170 ref 30 reboots after 5 hours +/- the only one that i didnt tried yet was Mem 2060 vdd 840 core 1190 ref 30.
If it reboots i’ll try those , if doesnt work too i will try to run the 580 alone.
yes, i belive your issue is with nvidia, team red for amd is solid, do try 580 solo or only nvidias…im quesing if u go with nvidia u will have same reboot later,but will see 
1 Like
