thanks ! and what does it mean ? :
those are rx vega straps…amdmemtweak…same as rx5xx card we have ref 30 etc
Nothing to do with 580´s…
Thank you for all your help 
have a nice evening !
Hi everyone. I am running x6 Sapphire rx 5700xt Pulse GPUs on my rig and since I updated to 210426 I have been getting the “gpu 1 detected dead” error. Before this update my rig ran without any issues and have never received this error in the past. So it makes me think it’s an update issue rather than a hardware issue. Also haven’t touched my OC settings either so I have rolled back to the previous update to see if that error shows up
OC settings
Fan 75
core 1430
vdd 760
vddc 760
mvdd 1430
mem 925
335.8mh/s stable
606w consumption
1 Like
i started to have same error and other issues with previos vers. now im back to 0.6-203@210424 with other rig, other i had reflash the image today so it went to latest, seems like its working fine so far …few hours 
on that one there is 5xx card only…maybe ill try the latest on the other too now.
so…upgraded and got first gpu dead issue after 15mins… 
edit…and now the miner wont start…wtf…i was running a stable rig!!!
Alright I was waiting a couple of days to do an update.
I tried rolling back updates and still had the same dead gpu error from teamredminer. Even though before I updated to the newest version I had never received the error before. So its almost like the new update tainted my gpus so when I would roll back the previous update my rig would still fail.
Anyway I switched to lolminer and tried that with the exact same clock and voltage settings and have had no gpu or miner errors. So there is something wrong with teamredminer. Hope this helps people. I suggest using lolminer, I’m getting the exact same hadhrates and power consumption as TRM.
2 Likes
yes, it looks like the dead gpu is now on allso previous os. TRM is not stable as it was. I get way lower hash with lolminer, im all amd cards.
Hi,
lolminer get lower hash and a little more power consumption than TRM but it´s the most stable.
I´m using to test your OC settings right now with 3 Sapphire Nitro OC+ and TRM and works fine. Lastest versión of Hive OS,
I have had nothing but problems using Team Red Miner for my RX580 rig. Rig would keep crashing on random cards, I also had a couple of times where the miner would detect that a GPU was dead but it was not and it was hashing just fine. This would trigger a complete rig reboot.
I have since moved to Phoenix and my rig has been stable for over 48 hours now without any issues.
Hello!
I have the error of the GPU Detected DEAD,
Could you share your setting of OC?
I have a 5700XT GIGABYTE OC rev 2
I think that the bios flash didn’t work
I rolled back with Trm and using older vers. 0.8.0 and that seems to be less headaches. if oc related, just lower your oc to “bacic” level and start tuning up from cratch… For me it not oc issue, everything was working fine before coupple latest fix on miner… like advanced gpu detection… i still cant run same oc than before but with trm 0.8.0 and a touch lower oc i manage keep mining. remember that it can be allso bad riser, so try to switch risers between gpus so u are sute they are fine. im waiting for new release from trm untill… im at. 0.8.0. I dont have any 5xxx cards. sorry
For me, it came down to the right OC. Tried a bunch of different combinations from the forums until i found the right one. I am pretty new and I just set up my rig. The cards I bought have custom BIOS. However, I’m unable to optimize all my cards. I have two of the RX580 PowerColor on the same BIOS but I can’t apply the same OC to both. I keep getting the GPU detected dead error with Redminer. Any ideas why this is happening? I’d like to reduce the power consumption on that card. The rest seems to be pretty stable since last night.
1 Like
im have been on latest TRM for while now. I belive that i “solved” dead gpu issue by backing up oc´s . I have now on 580´s vdd at 846 mem 2140 and core 1170. It dosn´t look like there is much difference in hash if mem is higher…for stable setup i assume its average mem 2140/core1150/vdd84-850/dpm&mdpm1/ref30-50.
The difference in total hash is so small that stability outweight the high hash and constant issues. I have been running high/med/low oc´c on most of 5xx cards and defo have came to conclusion that its more profitable to run stable, not too high oc, that results more accepted shares, your 24hrs average stays high, no stale shares. These are just my observations and do not apply to all rigs and cards, there is other factors hat affects how certain gpus are working…like what oyher gpus u have on the rig…like more powerfull amd/mixed rig, changing one gpu oc allways affects to others or some other card on the setup…then we can dive even deeper, how is power distripution, the psu power, risers-are they same gen,there is conflicts between lets say 006 vers 009 risers etc etc 
anyway, hope u get your rig sorted out, if nothing else dont help…reflash hive-delete your worker and start from clean slate, i have done that few times and everything have worked smoother after. good luck
Yeah, the more I try different things out, the more I realize several different factors come into play here. I’ll try out these OC settings to see if I can get somewhere. Will report back on that.
which mem tweak did you use in the powercolor one ?
the powercolor one is the problematic in my rig
I have one running fine with the settings in my picture at REF 30. My other one has the same bios and everything but is causing issues with all the settings I’ve tried.
And it happened again, restarted after one day and 3 hours.
1 Like
I tried those OC @zxxTheDragonxxz it was restarting every two hours roughly. It seems to perform better at 900 VDD. Running about 12 hours now. Let’s see what happens.
1 Like