Pcie bus location is listed in the error, make sure it followed or didn’t follow the card first
I really think that it’s the card error, because if I swap the card with another gpu that the pci-e slot is working the rig don’t want to mine and is offline after 1 minute. After that I checked if it’s because the wifi cables is disconnected, but I clearly see the green light so it’s connected. After, I reboot the rig with another card ans it’s fully funnctionnal.
Well you have some pretty aggressive overclocks there. I would start with lowering those to rule that out first.
Thanks, I have solve the problem with lowering the overclocking. Now, I have issues for mining because the rig always go offline. Can you help me with that too ?
lower memory a lot, and see if its stable
I put some more gently overclocking, after that I try to reboot my rig and I have some unreal watts and temperature values, plus I see that the fan is spinning at 100%, but when I go beside the rig I clearly see that the fan is not at 100%, but more around 50% like in my oc settings.
I think the card with hynix memory have some issues too, because with the gentle oc settings and the rig still have issues to mine. But when I remove the hynix memory card the rig fully work
That error is almost always from loose or faulty power cables. Try swapping them, or swapping the cards around to see if the error follows the card or the slot/cables
I think that it could be a settings in the bios of my motherboard, because all the slots are working when I put 3 graphics card, but when I put 4 cards it says this error. It can’t be the power cable, because if I keep the same cables add a graphics card it says the error. I also try with risers and I still have the error
did you ever determine if the error always happened at bus location 04:00? or does it follow a card?
It don’t follow any card and isn’t specific to any specific bus it’s just happening when I add a fourth card
It happened on the same sapphire card in 2 different slots, it is following the card.
I don’t know if it’s follow a specific card , because live my rig is running with the 3 sapphire card.
But when I add the msi card it do the error.
It’s the same card every error you’ve screenshotted
What is curious is that when I mine with the 3 sapphire cards, they all running well for hours, but when I add the Msi card it is at that moment that the Micron rx580 do errors
how are you powering the cards? its the same card every time, look at everything power related on that card. make sure the cables are good and connector is solid as well, you did change all the power cables on the card thats erroring already correct?
The 4 cards are power by a 1200w 94% efficiency server psu. I changed the cable and still the same error. I see that the card is well running when it have 3 cards on the rig, no matter what the card is. But when the rig have 4 cards it do the error. ( try this whitout flight sheet to make sure it’s not an oc problem)
Maybe try isolating that card with a completely different power supply and new cables.
I Isolate the card with a new psu and cables ans now I have a different error when I have 4 cards of plugged. Still, when 3 cards are plugged the cards running perfectly.
whats the error? picture resolution is too low to see any errors