Keeping it is a very good idea tho, if somehow the card try’s to pull more hiveos wont let it, this could prevent a ton of very bad things. plus keeping it at 130 doesnt cost anything.
1 Like
I dont know why people are trying to go past 62 mhs for the 3070. Even if its a little under but your memory doesnt suffer, it will be more stable and offer longer service in the end. Stability and efficiency are far more important than 0.3-0.5 mhs
Its all about memory junction temps, not core temps.
The 3070s run cool even at max memory, atleast the Evgas do.
One thing to also keep in mind is that the 30 series cards don’t show mem temp, and they can get HOT. I’ve measured some mem temps (outside hive) at roughly 2x the GPU temp when the GPU is mining at 45*. Another reason I keep my fans on full blast
1 Like
Let’s hope that Nvidia adds memory temp to their Linux firmware fast. It is a shame that windows can but Linux still doesn’t support
You should benchmark in windows and use wininfo to watch ur memory temps. Then use those same settings in hive.
Just because you crank ur fans doesnt mean ur protected from killing your GPUs memory.
You could be totally fine, but you might not be, i would never assume.
3070s run pretty cool. 3080s are what u have to watch
That is not true at all…lol
Your fans use wattage, the faster they go the more power they use…
Watch your wattage go up as your fans ramp up.
Use auto fan and set ur auto temps to 50c, ull be fine
I’ve measured the watts from the wall with the system not mining and just adjusting the fan settings. The additional draw from the wall was 1.5 watts when going from 0% to 100%
1.5 watts is so negligible that it’s a 0 in my book.
HiveOS must think the same thing, because the watts reported per GPU don’t increase when I raise the fan speed
I see it changed every day when my fans ramp up…
Set your fan speed to 70%.
There is no point in messing with fan speeds.
Temp is more important. Set the temp u want in the fan auto window and you don’t have to mess with it…it will maintain the temperature u choose all by itself.
3 Likes
this is for 3070’s not 3060’s…
Hi,
Can you or someone tell me how do you guyz keep your cards so cold?
I have 4 cards 3070 - MSI EVGA ZOTACx2. Only MSI gives me 61.5 MH with temp 55C.
All the others are damn hot with the same MH - about 70-71C.
Also, I must say that even when I see settings for “my” cards they do no work as good for me for some reason. I do not understand why.
@LuLucul I was trying to add you on DC btw.
It is very clear - we do not use 2X fans cards. It is normal +15 degrees temperature of double coollers in comparison with triple collers.
Anyway, yours 70+ degrees temps - it is death for you cards in very close future. Speed up its funs, save your cards!
EVGA has 3 coolers but still very hot.
Its my first day in mining. Som im still looking for solutions.
PS @Artemiy777 Если знаешь секреты по настройке и тебе не жалко то буду признателен.
Whats ur room temperature ?
Set ur auto fan to 50c and they should cool, unless your room temperature is real high.
Set all GPU to
1100 core
2600 mem
And 125 PL even though power limit won’t matter
Fan Auto 50c
Try 1060 - 2400. Autofan - ON, target - 52-55 degrees. Use your fans. Where is your farms location? Locked or open box? What is the distance between cards? Ah, and also I set the 120watt fun in front of farms. Without it my 3070s would have 60 degrees in hot 30-35 degrees outside. With this fun - 50-54. Waiting for the more cold weather.
I have 30-32 in my room when its sunny outside. I live under the roof and you know what is the weather now in EU))) +33.