Do you know why would that be? On the box it doesn’t say its LHR model tho. If I cant get v460.39 how can I increase the mhs to its capacity?
Ohh, and I have tried updating the PCI Speed to both Gen 2 and Auto. Still nothing.
Tried different PCI slots, as well as connecting it directly to the Asus 490z-p motherboard. No luck
Do you think, that if I move over to windows and on 470.05 beta would be a better option?
I am having the exact same issue! eVGA 3060, does not say -KR or -LHR as soon as i downgrade to 460.39 I cannot boot up. I have re-flashed and tried 3x. If I unplug my 3060 it boots fine.
If you have any other GPU which is not 3060 try booting up by just plugging in that GPU. It should work. But then again we need 460.39 for 3060 lol.
I have tried a bunch of different things no luck just yet. My next approach is to load it up on Windows. Will update it once I do.
is yours an eVGA? 12-GP5-3657-KR
Yes, I have the same.
From what I understand all 3060 cards (not early Ti versions) are mining limited. The first release 3060 could be unlocked with that leaked released driver. But I think the newer ones are now limited by BIOS and something else? Sorry can’t remember what that is.
I understand the limiting the hash rate on 3060, but it’s should still work on Nvidia v460.39. I shouldn’t be getting that weird error.
I think that newly manufactured cards are supported with newer driver.
Hi everyone, well I’ll tell you I’m still doing tests, I’m using miniz and the truth is that I achieved 40MH without problems, the strange thing that happened with that configuration is that one gpu generated fan error and that gpu I put her to run with t-rex at 48MH.
What version of nvidia driver are you on?
For now, its not even about mining or the mhs for 3060. As soon as I connect my 3060 when I have nvidia v460.39 installed Hiveos does not boot up. I get a "“failed to allocate nvkmskapidevice” error and it running in an infinite loop trying to start the service.
I disconnect and my 3070’s boot up just fine.
3060 on Nvidia version 460.84 and 465 works fine but with low msh.
I tried miniz but on the newer version and it was giving me pretty low mhs.
Hi there, could you share how you switch the card with fan error to T-rex? I was trying several time. Everytime if I switch flight sheet duing the mining, all cards will stop mining until I reboot whole rig again.
I understand there are lot of people who can switch flight sheet of 3060 for the fan glitch trick but it never works out for me.
I m having multiple times my 3060 fan get to 0 after using miniz and I just leave it now.
So I am keep wondering what step did I missed.
Or we need to stop the miner first after fan error or we can direct switch to another flight sheet and the miner will restart?
I only saw that my fan went to zero and I put together a flight sheet with the gpu of the error only in t-rex and the rest with miniz, I would like to know how the error was generated because the truth is I would like all the gpus to be at 48MH.
Exactly what I did but it never work for me. Once I change flight sheet the miner unable to restart.
Lazy to keep restart everytime the fan error which make me lose even more share during the downtime.
Just let it run at it is now.
how do you get to error?
I didn’t do anything specifically to get the fan error. I guess it is the OC plus the MiniZ miner?
This is the error I was talking about “failed to allocate nvkmskapidevice” on line 1 while starting up HiveOS after installing v460.39 and evga 3060 connected.
No bueno on any new 3060s. It will not work on the older driver that people keep saying unlocks this card. I have 8 of these cards and tried every possible combination. Not worth keep trying to mine ETH.
Go mine ERG. I get 116+ MHs consistently no drama for days, and decent profitability but longer payback.
Just put these cards to good use and wait until this lockdown is over.
Or get some 5700 XT and mine ETH all day.
all newly manufactured GPUs from NVIDIA are LHR.
I have 48MH with 3060 Non LHR
I use MiniZ 1447 2550 Pl120
i push 2550 —>3400
When a error
Switch to T-Rex (20.4)
work fine
So i get this card GIGABYTE GeForce RTX 3060 Eagle OC 12B LHR (GV-N3060EAGLE OC-12GD)
What can I probably expect? Will it run close to 40MHS on ETH?
