Gonna test a couple of these-thanks
So aggravating-when NB Miner starts, for the first few reporting periods, all the cards start up at like 45MHs, but after about 3 reporting periods, they settle down to 38-42.
Just curious. Is everyone using current Nvidia drivers with current NBMiner? Please confirm, anyone who has posted big MHS with MSI RTX3060TI. Feels like my current driver setup on NBMiner is about maxed, yet I know the cards can do more than 40. I have 6 cards, so if I could get 2-3 more per card, it adds up.
I’ve tried a lot of values, most changes either lock my rig, or have minimal impact on hashrates.
Thanks four your share. I just mining 9 days ago. No windows.
I use btc79x5 and 2graindward 3060ti lhr and 3colourful 3060ti lhr. Average hashrate 216mhz (no invalid) last 48hours.
It’s the MSI B450 Max Gaming Plus…
On this rig I put photo is 495.44 driver, not available anymore in HiveOS - don’t know why… best second driver for me is 470.82.
No invalid shares, pretty maxed hashrate…
Yeah-I saw that about driver-I was getting best performance and stability on 495.44. I reverted this a 470 version for some testing and when I went to replace the 495.44, it also was not on the list. There were a couple OS updates this week, maybe some users are having issues with it, but it’s good for me.
Fortunately I had downloaded the driver package previously so was already on my system (but not on HiveOS available drivers list). nvidia-driver-update —list will bring up available, but if you had 495.44 installed before, the package might still be on your system-it says it at the very bottom-if you have the driver, it will update if you select it.
İ have little problem guys someone’s can help me
Gpu 1 hung detected! error - if this error happened several times, or failed to detect some gpus, please check your hardware.
Gpu 1 its 3060ti LHR how can i fix this.
Is it on a riser or plugged in directly? Recheck connections straight and good.
Are your bios settings good (gen 2)? Does the PCIE port you are using support your card?
Do you have power applied to both available power input ports of the GPU?
From command prompt at terminal, nvidia-info command should see your card and know about it…, I’d force a driver reinstall either way (nvidia-driver-update —force).
Post back if you are still having issues, but those are what I’d be looking at.
1 Like
İ didn’t check just i change miner for amd cards teamredminer
Nvidia cards t-rex miner 18 hour’s no problem yet.
John you have changed BIOS to the ventus versión ?
No, but I’m pretty sure I think I should.
Have you flashed to Ventus? Is it hard? Are you getting unlimited hash rates?
If yes, did you flash with nvflash or can it be done using the vbios utility on Hive?
Need more detail on the procedure, but it is definitely on the list of things to try.
I did not do it yet, but I saw several opinions that say that it is the solution, for hiveos it is very easy although I do not encourage me yet, I already have the bios downloaded, I know that it lowers the consumption and improves the mhs
Ok-also, I didn’t fully appreciate the temperature/performance correlation, it matters.
So I had my rig running very reliably at around 39 MHS, most of the time, so I wanted to park it in the rafter area of my garage-less airflow and higher ambient temps.
Everything was mostly good at night and early AM when ambient temps are the lowest, but in the afternoons, like 2-6 PM, my hash rates would dip down to the 235 MHS range as the card temps increased.
So of course, these things matter over time, so I busted the rig back down to ground level and lower temps. Up until now I’d been using auto fan settings, but I was like, what if I disable auto fans, and run the card fans at 60%. Sure as shit, I picked up a few MHS.
Check it out-all but one card over 40 MHS
Also found PL settings to be optimized at 140. Higher values don’t improve hashrates much, but below 140, hashrates decrease.
Yes, check the same, at this moment I have the Pl in 135 and I lost some more, I use another oc that seems better to me, anyway the definite solution has to be the change of bios
the bios that should work are the one that ends in DE and D4
Can you tell miner and nvidia version?
Çekirdek 1575
mem2400
140w
44mh
