Greetings all. In trying to mirror ss-silver ergo MH rates, I seem to fail. Wondering if anyone has insight or suggestions please. Below is what I gleamed from my OC settings and amdmemtweaks.
As you can see my hash rate can’t go much higher without dead GPU errors. This is stable except for GPU 0 that goes triggers the restart script with GPU dead every 12hrs or so. But watchdog.sh reboots my rig and GPU 0 starts mining ok again.
GPU 0 Hynix mem per ss-silver: amdmemtweak --CL 20 --RC 36 --RP 11 --WR 14 --CWL 8 --FAW 12 --RAS 22 --REF 65535 --RFC 239 --RTP 5 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 13 --RCDWR 12
GPU 1-5 Samsung mem per ss-silver: amdmemtweak --CL 20 --RC 36 --RP 11 --WR 14 --CWL 8 --FAW 12 --RAS 20 --REF 65535 --RFC 248 --RTP 5 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 12 --RCDWR 12
I want to move on th adding mo GPU but until I figure out why such low hash rates I don’t want to complicate the rig.
Currently no GPU has been flashed. They are used & stock as I rcvd them. I have 4 Vega 56’s in a dead pile that I am hoping to resuscitate them by flashing the GPU BIOS.
How can I get my hash rate to reach 180’s MH as I see in this forum?
Any suggestions are welcome. For guidance I have used teamredminer_autolykostuning guide and ss-silvers mining Ergo w/ Vega 56 post.
My setup is:
HIVEOS V. 0.6-213@220221 linux
ASUS B250 MB, 250GB SSD, 8GB Mem
(3) HP 1200w PSU’s using 2 now. 4GPU’s on one PSU and 2GPU’s on the second PSU
teamredminer v.0.9.3
My at-the-wall wattage is 1075watts. For the low MH rates I am not running well.
Thanks for allowing me to join your community and I hope I can one day help others as I hope others can help me.
Cheers, CommShop
Never mind: According to Nov '21 post by bonezy, no one is getting more than 140MH since ERGO update. I guess we just wait. I am still wondering if I should flash my GPU’s or since they are performing nominally as bonezy says, I should just continue adding GPU for now? Any feedback is welcome. Thx