The problem with this bios is that it dont even work with it if i pach it with PBE.
Thanks for your reply bro
Me too I think so but I tried every available bios for this card but no one works well.
Thanks for you reply bro
I had the same problem with my 570. I couldn’t patch in PBE. That was the problem, wrong bios, the memory is hynix but was samsung bios. Try to discover what memory your card has.
How do I disable secure boot? in the GPU BIOS or motherboard BIOS?
Sorry for this primary issue, but I have an Asus AMD Radeon RX 580 OC 8GB, GDDR5 - DUAL-RX580-O8G and it’s mining at 14mh … if it doesn’t show an error and restart in loop the miner…
Here are mine on four and eight gig cards, But I’m dual mining Zilliqua and Ethereum or Ethereum Classic on Ezil.me pools.
My memory is samsung and with almost the same settings :
1131 core
825 voltage
2100 meM
800 mem controler voltage
Aggressive undervolt on
57 fan speed
I get 30.77
With 95watts
I got a RX 580 MSI Armor MK2 8gb, bios modded the original bios, but I can’t overclock the memory to 2100mhz, it shows the message gpu dead (max working is 2050). Does anybody know why?
your bios mod is not correct. i mean you have used too low tier straps. i had this problem when i used the straps from 1500 up to 2000 for my memory. then i loaded again the original bios and copied only straps from 1750 up to 2000. so do the same and it will fix.
I didn’t understand you. I just used One clicking timing patch with Uber mix 3.3.
Ps.: With the original bios I couldn’t put more than 2050 too.
My bios if you want to see: RX580 MSI MK2 Original bios
Modded BIOS: RX580 MSI MK2 BiosMod
its not bad but I want to can overclock more if I want
Ypu have the same memory as mine but my card is power hungry and makes 98watts.
You can manually mod the bios. Open it with polaris bios editor and copy the straps from 1750 to 2000. Upload it and test it.
I have a MSI armor 8gb oc that exhibits the same xxx-xxx on the memory. It was rock solid 31mhs @81w for days and now has thrown errors. Any ideas???
remove the DPM states and the memory voltage 1300 .
these settings doesnt work for RX 580/570 cards.
your card might need more core voltage to get these reject shares.
have you bios mod it ?
i suggest you do bios mod with ubermix 3.2 timings and the use the following settings for starters:
1150 core clock
850-860 core voltage
800 memory controller voltage
2050 memory clock
aggressive undervolting ON
amdmemtweak --REF 20.
do this and lets see how much you get.
Do not forget to backup your stock bios before modifying.!
I already did the BIOS mod. I will try again. Want to try and run slightly higher on core and voltage to see if I can get stable. Sitting nicely still on 31mhs will see how it goes.
Is there a way to do the uber timings? I just did the one click timing. I may go back to stock bios and keep trying. I seem to get invalid share here and there randomly…
I’ve tried that as well and it goes solid for a while then starts getting invalids
Could you try send me your bios from your Msi Samsung xxx-xxx-xxx to [email protected] the card is 2nd hand so maybe the person before me stuffed the bios up.
Do you run teamredminer, and if so what mode does it mine in? Currently mine is A248. Cheers.
it’s automatic for me but i’m using A287 right now