These are the ones that I have, I also have some 4GB ones too.
Yeah, they have loads of them on there but the organization is crap. You just have to do what I do and go through them slowly looking for the properties that you are needing. I’ve never had an issue with cross flashing as long as you don’t mix memory sizes, ie, 4gb to 8gb and etc…Amd is very forgiving in that regard. Just don’t forget if you’re using a windows that if you mod the bios you will have to do one of two things to boot up after modding. Patch your drivers or disable secure boot in your bios.
These are the type of cards that I have.
You see that the working bios is K4G80325FC, and the other bios is K4G80325FB, maybe this is interfering somehow. And the unverified BIOS on TPU is very messy, you are right hahaha I’ll look calmly after. I only used RX 580 MSI Armor OC verified BIOS until now, let’s see if I find one. Do you have any idea why the memory value appears so wrong in that bios?
And maybe MSI Armor OC and MSI Armor X has different BIOS
I just downloaded this from one of my working cards in one of my rigs. To be honest I’ve flashed both of these but I’ll flash yours and see how it acts in mine if you’re curious to know.
I am curious, tell me what happened after, ty
Sure will, but it’ll be later on tonight or in the morning before I’ll be able to check it out. Stay tuned and I’ll let you know how it goes. Kinda curious myself, I personally think it’ll flash back and forth, I flashed this particular card up to 2250 mem clocks and am running at 33.5 MH/s and 72 watts on ethereum. I’ll let you know.
Thanks man, appreciate it. Good night.
Hi every one I have the same card I bought it from a second hand market and it seems to be bios modded at first it shows that it contains a samsung memory with xxxxxxx but when I download this bios and I path it with PBE it fails to start so I downloaded this bios
pach it and boom it shows that it contains a hynix memory and the hashrate went up above 30mh/s but the trouble with it is that it always throwing invalid shares even if I use very low oc settings with 27mh/s.
I tested different miners and different oc settings but I always get errors.
So it would be nice from you if some one can help me to resolve this trouble.
Happy mining
I notice this in TPU:
maybe this is correct and works this way.
BTW maybe your memory is not Hynix and is Samsung too
your core clock is very low. try with the settings up in this post. put atleast 1100 core and also up a bit the memory maybe 2100.
here is my cand. when i open the bios editor it shows 3 types of memory supported but actually its with K4G80325FB Samsung. and thats the best i could do with OC and modding. I got 95Watts , it seems the card is power hungry. I have seen other cards with the same memory to go around 80 but my GPU is obviously weaker.
If anyone thinks i am missing something or can help improve, let me know.
Try this configs, it’s pretty stable, 1200 core clock is the best for me, better than higher clocks. You can try 2150 memory clock too
I cant use your because now i get 95w and if i raise the core and voltage iwill go even higher
are you using core state 1?
Nope i am not using states
I think you using the wrong bios