let us know if it’s stable after a couple of days
looks beautiful 
It looks nice.
I have a Zotac AMP Edition with Micron RAM… I’m afraid to try 1600mhz memory clock.
Suggestion?
Why afraid? try it 
MSI GPUS are always best in class
you cant bro, its silicon lottery, every gpu is different from each other
Hey guys!
I’ve just recently migrated to HiveOS. I mined on Windows on a Zotac AMP! 1060 6gb and I noticed something interesting about it.
If you open up GPU-Z and check the sensors, you can see that if you overclock the memory to anything more than -450 (Yes, negative 450), the MCL (Memory Controller Load) is limited to 80% and then hashrate drastically reduces.
Either on HiveOS or Windows, the max I could get from this GPU was about 18MH/s, with these settings. I’ve tried lower/higher core settings, the whole spectrum of memory settings…
Does anyone know how to bypass this MCL limit? Can anyone with the same board check on GPU Z to see if their board is also limited at 80% on that mclock?
Mining ethash in ethermine. Tried Phoenixminer, Ethminer and T-Rex, but all giving similar results. Changing anything else in OC settings doesn’t provide any better results.
Would like to get it up to 25 if anyone could advise…
Hynix mem can give less hashrate than micron/samsung
1 Like
how to tweak 2 types of vga?? Thanks!
i have a ZOTAC GTX 1060 with 6GB micron memory, but i get only 15MH, what’s the problem?
Kernel: 5.4.0-hiveos #108
OS VERSION: 0.6-204@210608
DRIVERS: N 465.31
1 Like
Do not downclock core, try +100 and look what happens
Hello brother I have question
after congig my NB config
memory tweak 1
platform 1
after that my amd is not mining how to run with both
please helo me
Merhaba Bendede Aynı Kart Var Ama Ben 17.5 MH Alıyorum.Sen Bios Attın mı?
Benım PL Degerlerı 90-120-180 eger Kullandıysan Paylaşırsan Sevinirim.
Zotac 1060 6 Gb Samsung Çip için Bios Paylaşabılırmısınız ?
Suan 17 Mh Verıyor 90w ile
Did you get invalids with this? Trying the mem tweak as well. How did you end up going with this
just to share my settings for 1060 6gb hynix (palit dual non-oc)
HiveOS t-rex: mt 1, +160 core, +1000 memory, PL 90
24hrs no invalid/reject on 2miner ETH pool. 22.77mh, 58c @ 32.5c ambient open air rig
this is the best so far i can get without temps going above 60c
1 Like
Hello all, i have mined with nbminer with the memory tweak but i can’t confiq the file anymore. Someone know’s what happend?
Thankyou already
