Hi,
Looking for stable settings for RTX 2060 samsung memory.
I am adjusting the OC of the 2060 PNY (Samsung) with CORE CLOCK 1050 MEM 1900 PL 125, cooler 65% and MINER Phoenixminer
Results:
Hashrate 32,19
Temp 54C
Energy consumption 81w
Is this the single fan model?
Yes. Now I changed OC of MEM to 1860 to reduce the rejects hashes.
OC of my 2 2060 PowerColor (Samsung)
CORE 1100
MEM 2200
PL 125
cooler 65%
MINER lolMiner
Results:
Hashrate 32,50
Temp 51C
Energy consumption 82w
Ive used many settings and these are by far the best. Only using 86W of power and pulling 32.63mh on a GTX 2060 with Samsung memory
If you set the core at lets say 0 or -50/-100 your power consumption goes crazy right?
Been mining with the PNY 2060 myself, and I indeed like this GPU for its stability.
Wow
You are pretty much putting ur GPUs to BBQ…
Might wanna try autofan.
From what I know, you should try to run ur VRAM below 74 °c if u run ur Rigs 24/7.
And usually VRAM temp is ~30 °c above core temp. So, most likely ur VRAM sits at over 90°c with Core being over 60 °c.
Actually I found my 2060’s not to need more than 1050 core, some need only 1020 core clock to reach max hashrate with lowest possible consumption.
Hi.
There is an OC for 2060 (hynix memory)?
Thanks
do you have the settings for hynix?
Andybody have settings for 2060 hynix memory?
Anyone have Hynix setting for 2060 please
is not running??
samsung memory is fine but hynix memory i couldnt get a better hash rate with under 100w usage
What mining software are you using? trex ? phoniex ?