Show your worker overview screen. Is your hive up to date?
You have to restart the miner after making changes
The only way I’ve heard to see stats and balance like that is using Telegram on Whaletonpool and the Ton bot will provide the info. There are setup instructions in the TON mining setup thread. Once you download and setup Telegram then these are the commands to check mining info while dual mining.
[quote=“Lamar249, post:4, topic:70385, full:true”]
Also does anyone know how to check my TON miner status like you do for ETH on ethermine.org.
[/quote] You have to register your wallet adress at Telegram with the Bot
Thanks, I had already figured it out.
Okay, I’ve never really tried to do this myself so wish me luck lol. What was your process for finding VDD/VDDIC/MVDD settings?
RX 580 30mh/s ETH / 500 MH/S TON
RX 590 29.30 mh/s ETH / 490 MH/S TON
3060v1 47 mh/s ETH / 750 mh/s TON
Anyone with similar cards can post his numbers?
Trial and error. The goal is to minimize power draw while maximizing hashrate
Use the core clock to limit power draw, not the power limit.
Okay, I will try that. Is there a reason why not to use PL?
I reverted those settings my watts went over 200 for some reason but before without PL it was sitting at 165 idk what happened.
You can and should use the power limit as a failsafe, but limiting the power will just pull core clock down to meet your power draw, so you have your core clock set to 1800, but with that power limit it’s probably throttling a good bit. It’s kind of counter intuitive to raise the core just to throttle it down with a power limit vs lowering the core to begin with.
Yea, I figured that but posted a reply anyway for the next person that hasn’t yet. Doing my part for the community and all…
Thanks man
lowered the core to 1700 and started getting this.
You have to restart the miner after changing core clocks
I gave up some how my watts went up by 20 with the original settings I had. lol
It’s better to start low and work your way up, then you can watch the power draw slowly go up until you get a setting you’re happy with.
Any better pools than ton whales?