OS
Pool
ASIC Firmware
ASIC Hub
More
blog
Blog
News and Articles
forum
Forum
Top discussions, announcements, help
Show all articles
Referral Program
referral
Increase your income with Hive. Invite your friends and earn real cryptocurrency!
Get your referral link

Booting problems

OS setup and Linux
,
#55

Okej guys i have problem after hive its going to black screen. MotherBoard is GA-H110-D3A. I try boot from usb&ssd, Try every grapich too see screen, try to get on vnc, but nothing. I try this too:

Read this https://www.gigabyte.com/microsite/462/mining.html
and execute steps 1,3-6 as wrote at link and don’t execute (or reverse as wrote) step 2

When i try to boot from internal grapich then it stucks after yellow screen, when it say that i need to use external grapich not internal on motherboard…

Grapich cards are: 570 4gb sapphire elpida

1 Like
#56

Got a Biostar TB250 12 GPU board with 12 106-100 Gpu.

For some reason the OS will not really boot . Boots to the emergency mode.
Any solutions for that ?

#57

@Dalis
Try to download and install 0.5-32 image with subsequent updating to the latest.
I’m guess maybe some issue with linux kernel (4.13 in new image and 4.10 on previous 0.5.xx HiveOS releases ) or something else …

1 Like
#58

@HaloGenius
Jup works on 05-32 image. Will try to update it later

#59

@Dalis
Ok )

#60

Everything is working initially when booting from USB, but after hitting the re-boot button from the hiveos.farm online panel, my USB becomes so corrupt or something that bios doesn’t even detect a USB installed and the machine restarts to the BIOS screen.

So, I’d love to try and put this on an SSD, which I have, the only problem is that it gets stuck in emergency mode. Is this same problem @Dalis was having? Perhaps I should try an older image on the SSD like @HaloGenius suggested, but not sure if it’s exact same problem.

FYI, I’ve flashed the same hiveOS image that works on USB, onto my SSD multiple times, with multiple utility programs and always get the exact same result, boots into emergency mode.

For what it’s worth, here are a couple photos. The first is the screen it gets stuck on, the second is I figured out some commands and found the only time I see errors listed in the logs.https://forum.hiveos.farm/uploads/editor/6k/fxli0ek7eqk0.jpg
https://forum.hiveos.farm/uploads/editor/y4/2yrwcur5g12a.jpg

Thanks for any help you guys can give me.

#61

@flatlander84
Yes it’s seems problem like Dalis has.
I’m noticed users has some unexplored problem with new flashed image v0.5-45

#62

Thanks again for the response @HaloGenius. I’ll try the older version when I get home later and report back here.

#63

Indeed, @HaloGenius, that was the problem and the solution. It was solved by putting the image of the previous OS version onto the SSD and then it worked like a champ.

Hopefully this helps some other users too. Thanks again for the help!

#64

What is the problem?

#65

hello
I have a problem,
I try to install but my pc can not run img file? what can i do ?
how can i resolve this problem as i want to use but i cant i try 3 diferent burner program

1 Like
#66

Two different problems, I don’t want to spam both sections, so mods if you must, please delete my other thread:

Problem 1:

I used the built in flash bios function of hiveos to flash an MSI rx570. It failed to flash the bios I selected, but once I checked the “overwrite security” check box it flashed successfully.

It asked me to reboot, I did, and now the miner hangs on the intro hive screen. “a start job is running for HiveOS” ~27s.

before that; drm:amdgput_device_init [amdgpu]] *error hw_init of IP block <gfx_v8_)> failed -22

Problem 2:

4GB rx560 and 4GB 1050ti give a not enough GPU memory in ETH+DCR Claymore. I believe this started happening after I updated to 0.5-.51 today. Is there a way to roll back OS?

Any ideas?

1 Like
#67

I’ve flashed the iso to a usb, but no mater what the boot settings are in the bios hiveOS will not boot

1 Like
#68

5.51 only boots into bios

5.32 boots to blank screen with only a caret

1 Like
#69

strange… it works when I wrote the .img with startup writer in ubuntu but not when I wrote with disks or with dd from the cl

1 Like
#70

The Problem is that HiveOS shutdown is a simple shutdown
and does not really looking for if services are finished and
write their data back. So if you have a slow device the write
back process is not finished and it end in corruped partition.

I guess the shutdown script has to be a bit more “sensitive”. :wink:

The magic is to have a script wich checks all of the important
“service status” and after all services are finished do the reset
or shutdown.

#71

#72

Приветствую, коллеги! Проблема в следующем: работал риг с 11-ю 470/570 все на 4Г. Заменил все карты на 570 8Г - хайв грузится только с 9-ю. С 10-ю выдает ошибку:http://forum.hiveos.farm/uploads/editor/mk/7nvs5on8b70h.jpg
Пробовал образы с 05.51 по 05-12. Фото - ошибка загрузки 05.12. Далее следует бесконечный запуск Xorg. Что-где подкрутить? Помогите пожалуйста разобраться.

#73

Ветка умерла?

#74

Сегодня попробовал на свежем образе 05.53 - выдает немного другую строку:
kernel BUG at arch/x86/mm/pat.c:536!