That’s great news. Do you have any M2 to PCIE adapter to try?
Thanks! This answers my question on why I get video from my Z390 based rigs but not from my Z590 based rigs!
Hi, could you explain what did you do? Because I connected the hdmi to the first gpu and after the blue screen of hiveos which shows 4 options, the display goes black.
Displays for all late model igpu goes black on HiveOS.
i did connect the HDMI to dedicated gpu not igpu, should I make any changes in bios?
Please provide us more details of your hardware (GPU Models, DPU, RAM etc)
Hi Dear I m sorry I m tiny late but bought TZ590 Board problem I cant set it for mining,…Must test more…
Hi, Please tell us more details about your setup. What GPUs, CPU?
Did you buy this motherboard from us?
Hi there, did anyone able to install more than 10 GPUs on this TZ590-BTC Duo?
All
I have two 8 GPU rigs upgraded to the TZ590-BTC MB from Z390-P. Very pleased after the first 10 days. Both rigs just came up and started mining. I did nothing in the BIOS. And so far very stable compared to Z390. For example, no shutdowns due to network broadcasts or power surges, and system comes right back after power outages and network outages.
No not yet.
That’s great news. Thanks for sharing your feedback.
I Have 11 running … and unable to get it to 12
Hey Martin, are you using 1 to 4 PCI splitters? Have you sorted out what the issue is - to 12 GPU?
I temporarily borrowed the GPU from my Gaming PC, to try 11 GPU running on this mobo, and it works fine.
Has anyone got this motherboard to work with 12 GPU?
I get 11 but it wont start the 12th. Uxing PCIe splitters but ordered m.2 to usb risers for PCIe. Links below.
2Pack NGFF M.2 to USB pcie Riser Adapter Mining Card, Adapter Card Riser molex Power Cable Adapter for BTC https://www.amazon.com/dp/B09MPN9GJ5/ref=cm_sw_r_apan_i_B6KK7SESKQ33A7AT959E?_encoding=UTF8&psc=1
PCIe 1 to 4 Riser Card, Pcie Splitter 1 to 4 PCI Riser Card, 4 Risers into 1 PCI Card, PCIe Multiplier Risers 1X to External 4 PCI-e USB3.0 Adapter for ETH Miner GPU Crypto Bitcoin Ethereum Mining Rig Amazon.com
Also, to add to this. Does anyone thing the splitters will work if I change the PCIe ports on the board to Gen 1, 2, or 3? Currently on auto.
Struggling to get 12 GPUs as well back down to 10 stable, my current setup:
- https://www.amazon.ca/gp/product/B09MYVVYVJ/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&th=1 with only 5 of the USBs in use connected to the top most PCIe port
- https://www.amazon.ca/gp/product/B09FDDC229/ref=ppx_yo_dt_b_asin_title_o06_s02?ie=UTF8&psc=1 connected to other PCIe ports on the board
- In my case i needed a wireless card for connectivity so the main PCIex16 port has a wireless card in, im assuming i loose a lane there
With the above, i had to remove the m.2 drive i was booting from and move the OS to a Sata HDD. Windows detects all 12 GPUs but disables 4 and on bootup i get an error message in the BIOS: “PCI OUT OF RESOURCES CONDITION”, removing 2 GPUs removes the error and enables 10.
Been playing and moving things around a bit, no luck so far.
UPDATE1: Got it down to 11 GPUs and the wireless card. I think ill stop touching it now, im happy with this 
yes i’m using the 1x to 4x splitter in the x16 slot. was not able to get it over 11 gpu.
Same here, I’m using a 1x-to-4x splitter, also not able to have it working over 11 GPU.
Thanks for the Reply.