I tried boot from USB instead of SSD but with same result of black screen after boot.
This section I understand，the system allways mining,and you just cannt catch the moniter signal views.
You can try another ways to view your rigs without moniter.
You just make sure the hiveos running.
first you can get local IP from Dashboard .
and next you need use SSH tools to terminal login into the system by use local IP.
and you can use screen commad line to cut-in session.
screen -ls
screen -R ID
more details view this link.
https://forum.hiveos.farm/t/remote-access-hive-shell-start-wont-stay-connected/53650/13
Hi,
Im already using Remote Access (Hive Shell Start) for all machines in my farm. But it bothers me that I do not have the ability to manage the rig on the monitor and keyboard, which are connected directly to the Rig.
More than 50 RIGs are OK but these new ones bother me 
So it seems that the only way to connect a local monitor is via a PCIE GPU. Or maybe there will be fix in HiveOS/Linux distro 
hi dude,donnt toss rigs,just stable running,donnt warried about some problem,the rigs just lie down there so quietly to earn dolar for you.
U just forgot that problem,some little trouble maybe make big trouble.
1 Like
Of course, I understand what you mean
But in principle I am annoyed that it is not possible
Right，that is unacceptable.
1 Like
Try to use Gpu hdmi slot , I am not same when I using the onboard graphic
Iam using z590 d gigabyte
GPU (in PCIE slot) HDMI port is working. But onboard GPU has no output singal. Even if its set onboard GPU to default in BIOS.
so just use the gpu hdmi port if you need to, but you can remote access anyway
@maras I have the same issue and not able to find a motherboard setting to fix this. I tried setting PCIe Gen1 Gen2 and Gen3 but no joy. I also have another issue: I can only get 1 GPU to register. First GPU is a RTX3070LHR in main PCIe slot and I tried adding a second GPU (Zotac 3070). First GPU registers but second doesn’t show in dashboard. I also unsuccessfully tried a third GPU using a riser in 5th slot with same result. What motherboard settings are you using for multiple GPUs?
I have 6x 6700XT cards and everything works fine but vidoe output only on PCIe GPU. Its only insignificant problem.
I set BIOS like usual, nothing special (Gen2, 4G enable, disable audio and serial, disable cpu virtualizaton atc.).
For next few RIGs I try buy MSI Z490-A PRO and with M2 reduction I have 6 GPUs mining and even with internal GPU. So from now for next RIGs Im staying with this MOBO.
Even BIOS settings is much simplier for mining than with ASUS
1 Like
I have thse problem. Anyone found any solution for CPU Graphics ?
I encountered the black screen after the boot selection on the Asus Prime Z590 as well. It seems to have an issue with the onboard graphics chipset. My work around was to patch in through one of my graphics cards. Then perform wifi setup. It is display only because the system is booting normally in the background.
Guys,
Any ideas how to make Motherboard HDMI operational ?
Unfortunately, no. I bought batch of Asus Z390 a MSI Z490 boards and start using them instead of Z590 boards.
By the way, what I did I calmed down and reinstalled the whole rig (due to another issues but not because of HDMI) adding cards one by one.
Once I add the 1st card I connected a monitor to its HDMI. It is working okay.
Nothing new with it, but next time I will not spend time on solving “cosmetic” issues with the rig.
Hello, could you reset all the BIOS settings for the z590?
Any fix for that issue? Black screen on me too
The problem is the CPU we are most likely using…HDMI and Display Port are only supported with 11th generation Intel CPU and above…I have a 10th generation because it was cheaper. The graphics will work on VGA with an older GPU or regular card. However when it is setup the MB works fine in the Hive.
2 Likes