huge help guys i own one of these w7100 cards and its not recognized as w7100 instead its unknown help please help to make identified
You can’t use TRM have to use Phenix
guys help me please something am doing wrong. I have a w7100 and its identified as unknown dell then bios id ill upload so you can see what’s going on cause am confused to the brink of no return
What’s up bro please share the oc settings for this card cause some things vddci mvdd don’t make any sense to me
Can anyone post their w7100 modified bios please? Thanks in advance. I have one, but its mem clocked at 1525 and I’m getting too many memory errors for it to mine successfully.
I posted one literally ten posts up from you…
I saw the posts. But for the life of me I don’t see the link. 
Hey man how did you get your cards to be recognized as FirePro Dell 7100 instead of unknown that’s question one and question 2 is on a stock bios what are the proper overclock settings cause things like mvdd and such things just confuse me more
Those Bios are too small and wont load.
Weird, I literally just dumped it off my W7100 using GPU-Z and uploaded from there.
I’ll see what’s up when I get back home.
If HiveOS won’t flash the card even though the filesize is correct, you will need to use “atiflash” from the HiveOS CLI
I use the beta image with the latest drivers for it to autodetect any of the FirePro/Radeon Pro cards.
I use the regular versions for the Firepro S9150 (which reports as a W9100)… so I think it depends on the card, not the HiveOS version.
“the WX7100 (Polaris) refuses to handshake with an AMD driver if it gets a BIOS mod for voltages/clocks/power target.”
You need to run atikmdag-patcher in windows environment and it works fine
S9150 users–
I picked up a few of these cards on ebay; how are you cooling them? Trying to avoid the $20 3D printed 40mm fan solution :p. Thinking of feeding each card with a Noctua 120mm fan to keep temps down, but trying to figure out how the duct the fan down to the card profile is challenging.
Nice! Did you find a reasonably priced one? The $20 ones I found were a bit steep imho.
I put initially and saw 2x v340 (they have 2 gpu’s and 2x16gb ram per card) as I should. I have to be using an HPE server right now (mine have HPE part numbers on them) and they seem to have an HPE specific bios. I was able to mine with them only for a short time before a “thermal error”, on them. They don’t throw the thermal error when in a HPE Server. In a dell it does… Working on getting a generic BIOS for them.
As I recall the Mi25 is a Vega also (have you tried putting the Vega) FW on it? I also recall some one on reddit made an article about this. I have heard only NBMiner and phoenix work for the Mi’s
The WX7100, WX9100 works with Hive Out of the Box. Also the Radeon PRO DUO (basically 2x WX7100’s on 1 card), works out of box with TRM and HIVE.