So my GPU is going dead on even Core set to 1370 even.
Any suggestion please?
Can you shared detailed configuration please?
Hi, could you get an stable OC? I share my actual config where you also you can see the miner im using (teamredminer v.0.8.3). My GPU is Sapphire RX 6800 XT Nitro+. I cant down the power consumption and get also an stable mining without reboots. I leave it like this for days without reboots, see the screenshot. Tell me please if i can down the consumption.
But that one is Gigabyte. Mine is Sapphire RX 6800XT Nitro+. Im look OC settings for this GPU.
This is the best I can get now on HiveOS with 164w and I remember power utilization never came down on Windows as well using PhoenixMiner and it was giving 64.3 MH/S on 164w.
This is running since 15-20 hours now without any issues. I will increase the core to 1500 after 24 hours.
I need help with optimizing this a little better. Why is GPU 0 so different from GPU 1 when they are the exact same card/settings.
I have the same problems with my 6800’s from AMD.
Did you move the sapphire switch by any chance? I cannot lower it more than 153 watts. Adding 960 to the VDDmax lower the power from 164 to 154 but no more.
Increase your memory voltage from 1255 to 1315mv
Decrease your memory clock to 1065 mhz
Increase your core voltage to 700 mv
Increase your memory controller voltage to 800 mhz
Core clock add 1470 mhz
Vdd max 960
My wattage only 115
Use teamredminer v.0.8.4
Hope it will help.
Using Gminer can increase to 63 Mhs
Phoenixminer can get 64 to 65 mhash but not stable. Too many stale and invalid shares.
Teamredminer 62.3 Mhs but stable
I don’t changed the switch, I’m using latest hiveos beta, Wich version do you use? Just when apply the settings stop miner and reboot. I had like 147w before.
Strange, I have 0.6-206@210722 version and work with 2 previous versions, but Before I have like 147w, didnt nothing, upgraded and now this.
