and look if use settings like others Im geting :
Because in serveral forum topics I didint find bigger MH number than 47.
For my setting my hashrate is 49 mh/s 
1 Like
I am guessing you are wearing out your cards.
Also it is not very efficient: power consumption is quite high so you are not getting an optimal profit.
It could be better.
Look at this:
and calculate the watt per hash. Mine is much more efficient and i get more profit, even though hashrate is lower 
1 Like
ohh mate!!! Thank you very much. seems like Gminer works better with the Mech 2x cards in comparison to TRM which fluctuates the reported hashrate big time. plus I was able to bring them up to 47.2MH each
It’s better but you can’t compare Samsung to Micron chipset. With Samsung I can go 46.30Mh @66w while with Micron I can’t do better than 48.75Mh @82 I have still to find and efficient oc of this chipset because has different memory timings compared to Samsung
1 Like
which miner bro?
good stuff! do you have any idea why my system would be doing this after plugging in another 6700xt?
Hi there. I got 6700 xt eagle with micron memory. Would you care to share your OC settings for micron memory 6700 xt?
he probado tu configuracion y me ha ido genial gracias
So, after 24 hours these are my stable settings on TeamRedMiner. The biggest difference for power consumption is the SoC VDDmax setting which is set to 840.
For This Ati GPu Vram on 74° is a little to hi ??
I cant seem to lower the Wattage on this Micron 6700XT, tried everything i could find.
Lowering SOC freq and socVDD, either the card crashes or the hashrates fall off a cliff, any ideas?
2 Likes
Hi guys, here are my overclocks settings on differents rigs with AMD RX 6700XT with Samsung memory and also Micron Memory. I am using autofan at 80% minimum. Its for Dual Mining ETH + TON
This one is with Samsung Memory (And one with Micron)
This one is with only Micron Memory (I hate this memory type 
)
2 Likes
… I would, but my rig went down and now I can’t get it going again. The mobo wont post. I’ll try to share more later. good luck
Which SoC values are you guys using when dual mining ETH+TON? Looking for ways to save a little additional power, I only use SoC settings on ETH but haven’t tried when dual mining or on a coin like RVN.
