3070 ti is LHR, i didn’t try eth because I know I can get max 45mh @150w or something
Im dealing with 3060ti LHR, and its pain in the ass.
- had to upgrade driver and lost my 3060 3/4 eth speed on lolminer.
- It`s speed on ergo is also limited and hashes only 122Mhash for 120W - 200/2000/PL120
Any adwicefor better settings ??
I`m planiung to buy 3070Ti - ridiculusly cheap, to mine RVN/ERGO.
Just to be clear, that RTX 3060Ti is LHR?
3060ti is LHR ?
Can you drop us a screen of nbminer with real clocks of that 3060ti ??
EDIT:
And most importand, what driver are You`re using.
I tried unmineable for several days mining ravencoin with ethash algo.
So let me compare like this:
when i mine raven with lowest card i have 1050ti i mine 7 rvn/daily. I don’t put any oc because it heat up card and difference between 5.8mh and 6.1 its irelevant for me.
I added 3060Ti LHR to unmineable, using ethash algo, with 34 mhs. I mine 11 rvn/day.
When i mine raven with kawpow algo at ravenminer i mine almost 30 raven/day.
The only difference is that mining ethash algo i use card on 130watt, no matter i mine etherum or ravencoin with ethash.
But one way or another, 1 usd vs 3 usd daily is big difference. Electricity cost is just 1kw/day difference so its still more profitable to mine raven on kawpow algo, if we talk about 3060TI.
On one gpu It may not be profitable.
It also depends on gas prices throughout the day.
Right now raven is more profitable on ethash algo than kawpow, for my rig.
324 ethash vs kawpow 290 in one day
What are your oC settings on both?
Well my 3060 TI is lhr so i dont have full hashrate on ethash.
No full on eth and autolukos2.
Yes LHR
ERG + ZIL, nanominer v.3.3.7-cuda111
When i put 900 clock its give me 116 Mh/s super stable, but every time when i change settigs with 915, 940, 950 or what ever hash go down…so -600 and -625 give me best hash.
Oh ok
Hi,
1, Wondering how to setup to show Two MH/s , from the pic its showing 174.2M (white) & 50.96M (blue) in Hive os. ?
2, Is 3060ti is LHR or non LHR .Can i know the exact model/version of the card.
I have 3060tiLHR (INNO3D Twinx2) can i apply your OC setting ?
Thank you
@ravinayag
good question
@1389MaRe
My 3060ti cant change clocks…hive wint change it.
I need to investigate WTF…
EDIT:
Its kind a silly.... looks like i cant set proper clocks using ACC with setting PL, witch was normal on non-LHR. Just to remind - ve got lots of non lhr series 1XXX, 2XXX and 3XXX, but only 1 LHR…
Start and set Flight sheet with nanominer and pick ERG + ZIL so u can dual mine that.
Yea ofc this is LHR, Gigabyte GeForce RTX 3060 Ti EAGLE, u can see on image exact model…
Ofc u can try this settings but dont forget that PL is very important for this 3060 LHR cards, for my first card i can go from 102 PL but i get less hash, and i can go to 120 max, after that my hash go down…
And for my secund card i need to set 115 or more PL bcs that card need more power…
@1389MaRe
Thx. It`s simplier now…
My 3060Ti does this same with PL.
Tho most importand is, witch i discovered yesterday, PL works on ACC. Using ACC i must delete PL settings. It`s usfull on raven - my card need 185W ! to get hashing at 30mhash/s
1 Like
which pool are u using for ERG + ZIL?
Herominers and Ezil
My 3060 ti lhr cannot reach 130 on ergo algo, only half.
Could u show d top of ur screen?