so your mem setting is above 2000 not 1100 as you mentioned. So mine was one of the optimal settings.
Hi Guys,
I followed the thread and couldn’t achieve what I am looking from this card. Here are the details:
My desired scenario to achieve high hashrate (44 MH/S) and low power consumption (100w):
Mining: Eth + Zil on HiveOn Pool (Only option currently available for Nvidia card is NanoMiner for dual mining)
PhoenixMiner isn’t working using the latest version and V5.4c is not giving stable hashrate. It is fluctuating alot. PhoenixMiner also doesnt support dual mining configuration (–pool_strategy=min_epoch) just like TeamRedMiner or may be I am not aware.
HiveOS: 0.6-204@210704 (Latest updated)
Nvidia drivers: 460.67
Pool: HiveOn Pool
Miner: NanoMiner (Dual mining Eth+Zil)
GPU: Palit RTX 2060 Super (Also dual mining on AMD cards on the same rig using TeamRedMinder)
I was getting 43.5 MH/s on Nicehash Quick Miner on Windows (Very stable)
I was getting stable results on my AMD cards using Kryptex (PhoenixMiner + DaggerHashimoto) on Windows
Here are the results from 2060 Super on HiveOS:
Core: 1050
Memory: 2200
Power Consumption: 98W
Accepted/Rejected Ratio: 95%
But high Rejected shares
Miner isn’t crashing but 95% results will not give me good profitability and keeping it on low hashrate but 100% ratio might be better i guess. I will share results from HiveOn pool dashboard after 24 hours with stable OC which will guarantee that profitability and hashrate are giving correct resuts.
Stable OC on HiveOS:
Core: -50
Memory: 2100
Power Consumption: 125W
Accepted/Rejected Ratio: 98-99%
Finally got around to trying one of these 2060 Supers… the poor middle child of cards…
Best I can do in windows for now!
42.46 MH @ 110W
Holy cow are they painful to overclock \ under-volt and they often react completely differently to what you’re expecting
Should be much easier in HiveOS with any luck…
I see all the cards with samsung memory are doing 43+ MH. Does anyone with micron memory can produce a decent result? The samsung setting cannot be copied to micron and produce the same result. I cannot even hit 40. I think the operator’s card has micron memory as well
I have the exact same problem on my 2060S gigabyte.
On Hive OS this is the best results i can get out of it.
If i try windows it can do 42mhs+ using 101% PL (1035 Locked Core + 750 Memory at 120w, using t-rex).
Hi! Can you show your table hashrate? Thanks!
2060 супер я настроил вот так.
GPU 0
01: 00.0
карта GeForce RTX 2060 SUPER 7982 МБ · NVIDIASamsung GDDR6 · 90.06.44.40.02 · PL 125 Вт , 175 Вт , 175 Вт
выдает 43,52 м\н венты 0 -400 2050 130W
бассеин ти рекс
i am having the same issue here core 1200 mem 1500
mem wont go above 1500 without crashing 40.8 hash stable on phx miner can anyone help with uploading screenshots very new
mine dose 39.4 - 40.8 stable some days it goes uo sometimes down no loss in shared or any invalids but a reset every day helps that card only the micron chips arent as good as the samsungs obviously any bios anyone know of that will fix? all i can suddgest to get mem clock over 1500
I just started using the same. I get 45.84. Thank you for sharing!
te da fallas?
I have two 2060S’s which wont go past 39MH. One is Palit, one is Gigabyte. The common “feature” … Micron memory. I tried all kinds of settings for both but can’t get it to go past 39 if it meant saving my life. Anyone with experience with 2060S’s with Micron memory??? Any help would be appreciated
Zotac 2060s 43.7MH
Core 1010
Mem 1975
I got 42 from 37 by changing memory pads to grizzly and flashing immo3d bios
hi, which inno3d bios did u flash for ur 2060s?. mine is palit 2060s micron and stuck w/ 37.5, can i also asks what is the size of pads u put into ur 2060. thanks
sorry, not inno3rd after all. this 90.06.44.00.5C (kfa2)
though you also need to set PL to max (200) in order to achieve anything too
Thermal Grizzly Minus Pad 8
120x20x2.0mm
