Hive OS for ASICs

Available software for ASICs from Hive

1. Hive OS Client

It's a lightweight application running on the stock (or custom firmware of your choice) ASIC firmware.

• Allows you to see the miner in Hive, to control Wallets, Pools, restart and reboot the miner.
• Supports a broad range of ASIC models: Antminer, Innosilicon, Zig and even some FPGA miners.

Supported ASICs:

• Antminer:
  • A3
  • B3
  • D3, D3 (Blissz)
  • DR3
  • E3
  • L3+, L3++
  • S7
  • S9, S9i, S9j, S9k, S9SE, S9-Hydro, S9 (VNISH)
  • S10
  • S11
  • S15
  • S17, S17+, S17E, S17 Pro
  • S19, S19 Pro, S19j, S19j Pro, S19+, T19
  • T9, T9+
  • T15
  • T17, T17+, T17E
  • X3
  • Z9, Z9-Mini
  • Z11
• Innosilicon:
  • A5/A8 (need test)
  • A9 ZMaster
  • D9 DecredMaster
  • S11 SiaMaster
  • T3 BTCMiner
  • T3H+, T3+, T2Th+, T2Thf+, T2Thl+, T2Th, T2Tz-30T, T2Thm, T2Thf, T2T+ (32T), T2Ts-26T, T2Ti-25T, T2T-24T
• Todek:
  • Toddminer C1, C1 PRO
• HashAltCoin:
  • Blackminer F1, F1+, F1-MINI
  • Blackminer F1-Ultra, F1-MINI+
• Zig:
  • Z1, Z1+

Actual list can be always found on GitHub.

All the instructions on Hive OS Client installation can be found here.

2. Hiveon ASIC Firmware

It's a custom firmware that replaces the stock one. Supports only selected models: Antminer S17, S17+, S17E, S17 Pro, S9, S9i, S9j, S10, L3+, L3++, T9+, T17, T17+, T17E.

• S17: up to 72 Th/s with air cooling
• S17 Pro: up to 80.1 Th/s with standard PSU, up to 85 Th/s with liquid cooling
• S9, S9i, S9j: up to 16.8 Th/s with standard PSU, up to 19.1 Th/s with the custom one
• S10: up to 21.5 Th/s with standard PSU, up to 23.5 Th/s with the custom one
• T9+: up to 13.6 Th/s with standard PSU

Hiveon Firmware for other ASIC models are coming soon, so stay tuned!

Hiveon ASIC Firmware features:

• Speeding up of worn ASIC chips;
• Manual and automatic selection of voltage and frequencies;
• Individual fine-tuning of frequencies;
• Chips stop consuming electricity if the Internet connection is lost;
• Antivirus protection;
• Recovery of devices that have previously been infected with viruses;
• LEDs flash on an ASIC in case of fan or chip failure;
• Built-in wattmeter;
• Watchdogs for temperature and hashrate;
• Hive OS is free when using Hiveon ASIC firmware!

All the instructions on firmware installation can be found here.

Hive OS Client and Hiveon ASIC Firmware comparison

Hive OS Client and Hiveon ASIC Firmware are not the same products.

For any information you may need about ASICs, please check our forum, Github or our Knowledge Base.