Been messing with OCs for a day on ERGO, I dont think the DMP state works on the Vegas and MDPM is set to 3 by mem clock value so pretty sure setting those states in HiveOS does nothing.
I noticed pushing past 170-180mh it takes alot of watts, not sure how much its worth a couple extra hash. Temps get real high if you up SOC to 1028 see GPU 3 below.
@Rocco1180 what OCs you running?
with 5xx cards there is difference with states,u maybe meant that they dont do nothinjg with vega´s?
ya TRM guide for the vegas says to lock core and mem state but cant figure out how to do that in HIveOS
okay, i havent noticed that on trm guide… must read it thru again tomorrow. Do u mean like locking Mem to state P3 and Core P7… to highest states? I have been in belive that when not Setting states gpu can use required one… but there is a default state for Mem when Mem voltage is not set, right… options 0-1-2 states. For Core default was 5 if vdd is not set, but we do set vdd so… max state 7…1-7, so how gpu uses Core states when not set by user.? more study! let us know what u find out 
Hi,
1225MHz Core 800-820 VDD and 847 Memory. 1330MH@1260W
But the cards are jumping a litle bit in hashrate. I think this is a unstable Core clock.
Nice those are really efficient, might try those out soon. I’ve had the same thing happening with hash rate moving quite a bit with much different settings. In the miner after 24 hours I’m averaging 1050mh on the AMD cards so I think it just an issue with reporting the hashrate. Have been getting quite a bit of reject shares, but on very aggressive settings.
interesting, havent tried ergo yet, so is vega´s with same straps with ergo?
I bought a few Vega 64 recently but some were detected as Vega Pro V320. It could not mine with TRM and were not able to flash to any other BIOS in Hiveos. Did anyone encounter the same problem? What is your solution?
this card have 16gb hbm2 memory. you can try to flash it to a vega Frontier Edition. Vega FE will work with TRM.
Good luck
hi, thanks for posting your ssettings for Ergo. I see that there is same values for samsung and hynix, are these settings aggressive or more gentle…just trying to figure out what would be good starting values so that ill gett rig mining…i tried these and the ines Silver posted, but my cards didnt fired up…so too high for my setup or ?? Is there some extra configs beside normal flightsheet stuff that needs to be set for vega to work with Ergo ?.. would be nice to give it a shot…i usually mine all new coins for a while that i find interesting and set up flight sheet and oc template for future use 
same straps I was using for ETH, no other changes besides OCs.
@Smining570 if its not mining at all, I needed to use woolypooly for the pool, nanopool would not mine but Woolypooly started right up. If its starting then crashing you need more VDD for that card.
I think I figured out what is going on here. Each time a new job is received, TRM says the GPUs are generating a table, then you see the hash rate drop immediately. I kept an eye on the miner it stays at full hash rate until yellow block of generating table show up then hash rate drops for a bit then returns to full hash rate.
tried with vega rig and the other with 5xx cards, couldnt det either to mine. Dont want to loose more time from eth mining so must try again later whaen i have more details about settings for Ego. thanks for the info 
My gigabyte vega64(flash to 56) can’t run stable on ERG TT
core 1225 vdd850 mem 847
don’t use timming and tried every timing that i know.
what timings that i can do? any suggest?
Gigashit Windforce 2? If so, sorry man… This ist the worst card i have ever tried to use. i endet up selling them and buying a other modell…
maybe mor vdd can help. 1225 Caore and 847 Mem should be posible with any card.
I m using standard straps vor Samsung.
Good Luck
try this, core at 1300 vdd 810 mem 955 with straps:
amdmemtweak --CL 20 --RC 37 --RP 11 --WR 14 --CWL 8 --FAW 12 --RAS 20 --REF 65535 --RFC 239 --RTP 5 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 11 --RCDWR 11 using lastest vers of TRM as of writting hope to be of help
gaming oc but heat sink same wind force so sad i think i must sell it soon.
mining ERGO graph like this is normal?
yes, even mine is like this, I’m using trm,
