I was able to tweak a bit more, 36+ hours running up with those settings:
0 - gigabyte ref
1 - sapphire nitro+
2 - gigabyte gaming oc
3 - sapphire pulse
1 Like
I would like to know if anyone has implemented STABLE TeamRedMiner RMode for AMD Vega FE with 16GB HBM2 .
i have 2 x AMD Vega FE 16GB HBM2 cards with Samsung Memory. One card (GPU3) is stable so far but one (GPU0) keeps crashing every 45 mins to 1 hr . Here is what i tried so far in RMODE:
System type: HiveOS Linux 0.6-217@220522
Kernel: 5.10.0-hiveos #110
AMD OpenCL Driver: 21.40.1 (5.13.0201)
Miner : TeamRedMiner 0.10.0
RMode Flightsheet Settings under extra settings: --kernel_vm_mode=RR
unstable GPU = GPU 0
GPU 0 Clock settings: Core = 1000 , VDD = 820 , MEM = 1028
AMDTweak Straps:
amdmemtweak --CL 19 --RC 44 --RP 14 --WR 14 --CWL 8 --FAW 18 --RAS 28 --REF 65535 --RFC 300 --RTP 5 --RRDL 5 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 12 --RCDWR 10
Average ETH Hashrate = 42.5 MH/s
Tried the following Core, VDD, Mem settings with same straps but those were worse and very unstable:
Test 1: 925, 820, 1025 – crashed
Test 2: 925, 800, 1025 – crashed
Test 3: 900, 780, 1025 – crashed
Test 4: 900, 820, 1025 – crashed
Test 5: 800, 800, 1025 – crashed
Test 6: 800, 820, 1025 – crashed
Test 7: 1000, 820, 1025 – crashed
Any Help or suggestion is well appreciated
Hi,
I think the best is to begin with lower memory and increased if stable.
could you please share you amdmemtweak for the Asus vega please ? thanks
and increse the VDD also
Straps for ASUS Vega 56
amdmemtweak --CL 20 --RC 37 --RP 11 --WR 14 --CWL 8 --FAW 12 --RAS 20 --REF 65535 --RFC 248 --RTP 5 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 13 --RCDWR 12
1 Like
Hi,
This is what I am running in R-Mode. I am running a little less MH to save power.
Super stable for me. Let me know your thoughts. GPU 0 is ASUS.
Straps the same for all.
amdmemtweak --CL 20 --RC 36 --RP 14 --WR 14 --CWL 8 --FAW 12 --RAS 22 --REF 65000 --RFC 249 --RTP 5 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 14 --RCDWR 12
My thoughts on Vega FE and Vega Gigabyte cards. They are shit! Impossible to get over 45-48 M/h. SELL as quick as possible and avoid HOURS of headaches. I have almost all Sapphire and XFX cards…no issues generally…
Alan
1 Like
i agree the Vega FE cards are a nightmare to configure and get running stable.
Do you have " Aggressive Undervolting" enabled with your straps ?
I followed this guide for stable settings and high efficiency. You can do 52Mhs @93W in Software.
How to Tune Vega Cards in TeamRedMiner R-Mode
2 Likes
Samsung: amdmemtweak --CL 20 --RC 37 --RP 11 --WR 14 --CWL 8 --FAW 12 --RAS 20 --REF 65535 --RFC 248 --RTP 5 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 12 --RCDWR 12
Hynix: amdmemtweak --CL 20 --RC 36 --RP 11 --WR 14 --CWL 8 --FAW 12 --RAS 22 --REF 65535 --RFC 249 --RTP 5 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 12 --RCDWR 12
0: AMD radeon 5700 (Blower)
1: Sapphire Vega 64 Nitro+
2: Asus Vega 56 Strix
3: Sapphire Vega 56 Pulse
4: Sapphire Vega 56 Pulse
5: Asus Vega 56 Strix
3 Likes
I have a crashing issue with 2 x Sapphire Nitro+ ( GPU1 and GPU3 ) on one of my rigs . I have tried several Clocks with amdtweak strap settings and power values but can’t seem to have them stable for long
Tried for Core , VDD , Mem on GPU1 and GPU3 (Sapphire Nitro+ )
1: 925 , 795 , 1000 ( crashed after 1 hour )
2: 955 , 795 , 1000 ( crashed after 1 hour )
3: 955 , 795, 960 ( a little stable)
4: 955 , 812, 1000 ( Tested but crashed after 10 mins )
5: 900 , 795, 960 ( Testing now )
i have also tried several adjustments to amdtweak (straps) with changing --RC 37 or 38 , --RCDRD 12 or 11 and leaving everything else the same on the straps .
Any Help or suggestions ?
There is a new version of TRM 0.10.1, much more stable with Vega Cards
1 Like
Is anyone dual mining anything these days?
can u gimme that bios ? i got 3 powercolor RD vega 56 and keep crash each other every 8 hours. hope u can help me. 
what’s your final settings? have the same problem with nitro+
Its Sapphire Vega 56 Nitro+
Any tips for a good hashrate vega 56 Hynix ?
Im using:
amdmemtweak --CL 24 --RC 34 --RP 16 --WR 17 --CWL 8 --FAW 16 --RAS 29 --REF 65535 --RFC 260 --RTP 7 --RRDL 4 --RRDS 4 --WTRL 6 --WTRS 5 --RCDRD 15 --RCDWR 15
Thanks in advance
ETH is FINNISH 
Hynix up to 51Mh
i mine kawpow but I can not exceed 23Mh
what are you mine ? 
Hello,
did you manage to have a stable mining with your vega 56 ? My card rises very quickly in temperatures regardless of the parameters.
I didn’t have this problem with ETH mining.
I’va Vega 56 with Hynix memories, i’m using :
CC 1000
CV 775
MC 920
amdmemtweak --CL 20 --RC 36 --RP 11 --WR 14 --CWL 8 --FAW 12 --RAS 20 --REF 65000 --RFC 238 --RTP 5 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 15 --RCDWR 12
No. I’ve been vacationing. Haven’t had a chance yet.
