Yes, I have. I set it up just this afternoon. After some experiments (it took me about 2 hours to find good settings) it’s table so far. I’m using latest release of TeamRedMiner.
Oh, this is ETH+TON mining. On TON only, with a LolMiner, this rig reached a little bit over 10Mh/s.
I just started dual mining Eth + Ton on all of my rigs since the Teamredminer upgrade. 3 rigs with Vega 56/64 and 2 rigs with 5700xt. Lost around 37 mh/s on Eth (a little less than 1 mh/s per gpu) and I gained around 40 gh/s on Ton. Vegas are getting around 1.1 gh/s, 5700s are getting around 825 mh/s.
hey Guys… wich temp is safe for the HBM2? this sapphere in the medium day go to 84c the hynix only to 79. if i increase the mem and core up, go to 54 mhs but arround 86c
I have a bunch of Powercolor Red Dragon Vega 56’s. Two of them had one of the fans fail over the weekend. Anyone know where I can get replacement fans? Stock model number is Firstd FDC10H12D9-C, but the layout of the mounting screws is not the same as the one sold by Newegg (Firstd FDC10H12D9-C 12V 0.35A sapphire Radeon R9 Nano graphics cooling fan - Newegg.com). See the attached picture.
A mode is default with TRM
Flashed wrong bios on my vega 56. Now the rig won’t start with the “bios modded” card in the rig. When I pull it out, the rig works just fine. Any ideas what is the problem?
Enable Maintenance Mode and restart rig, select the option “with loading driver”
Then flash back the correct bios, restart again, done 
I have a problem with one of my Vega. It worked for a year givind 54MHs and sudenly yesterday hashrate dropped to 8.83. Looks like also memory temperature isn’t show correctly.
After the reboot it mine at 54 for few minutes and the hasrate drops.
I did not change any settings or hardware.
Anybody can help?
it seems it’s gonna die…
I suggest a deep clean or even a reflow
have you ever opened it in this year?
Hi, I would try a couple things first. 1- Power down and unplug ac power to the rig from the wall check all connections then restart everything. 2-Update Hiveos to latest version. 3- Refresh bios to card. 4- Reduce core to 1100. Report back. Alan
I had something sorta like. Opened, cleaned & repasted the GPU and changed the riser and all USB and power wires. Yes, in stead of troubleshooting I changed everything. Lazy me, but it worked, and probably faster than troubleshooting 
. Back at 55ish
PS: core can be lowered to around 1050 and vdd too to save some watt’s.
Guys
Thanks for tips.
I changed risers, cables, reflashed bios and no sucess.
I’ll try to open the card, clean and repast. Let you know if work again.
Take out all the over clocks and run it blank. Restart/power cycle your rig.
Hello dear friends
Unfortunately, my xfx vega 56 card had a problem and it is not known if it was mining before the update.
Now, according to the photo you see, there is no reaction
But the card works and gives an image
Could there be a problem with the BIOS?
Thank you for your help
If you have a BIOS of this model and send it to me, thank you
Hi. What is your Amdmemtweak settings ?
I have an Asus Vega 56 “Hynix” on my rig, I just mine to 50Mh + 900Mh to
Thanks
TRM has introduced R-mode. For Vega’s it could shave off a few Watts or give a small hashrate boost:
Although right now I’m having issues upgrading my testrig:
But once that is resolved I’m gonna try and run the public beta 
Any experiences may be shared here!
Have fun!
