Mitrabrate, read the initial post and read the thread, you’re doing the opposite of what is recommended vega 64 → vega 56 bios not the other way around. Leave you vega 56 cards with original bios. All your ref cards can be flashed from hiveos with this bios:
016.001.001.000.008771
Also read this thread
Vega 64 - 54MH/s with less than 130w
ALL SAMSUNG REF CARDS CAN ACHIEVE 55+mhs ethash EZ TEBRAAAA
means cards that are vega 56 to leave them the original bios, and vegas that are 64 to put a bios of 56.
vega 64 used bios with 220w and vega 56 bios 160-180w can i put bios from vega 56 on vega 64?
if my reference is sapphire or gigabye do I have to ask for bios from that manufacturer?
also what settings should i use for amdmemtweak?
my first 1 card: sapphite 56,
2 card: 64 xfx
3 card: 64 asus ( asus not referal vega )
4 card: 64 sapphire
5 card 56: gigabyte
can i use this bios that you sent or do i have to find a specific model that i use
I put the same settings and everything as it says, vega 56 with vega 56 bios and I get 45.85mhs
try different straps:
amdmemtweak --CL 20 --RC 37 --RP 11 --WR 14 --CWL 8 --FAW 12 --RAS 20 --REF 65535 --RFC 248 --RTP 5 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 12 --RCDWR 12
also try coreclock:1050, memclock: 1020
Core Voltage, mV: 830 (maybe more maybe less needs testing, all my cards using 780-810)
For BIOS Im not really sure don’t wanna tell you something I’m not sure. AFAIK all reference models with Samsung memory use AMD Bios so it’s all the same, make sure you Subsystem ID is the same on your card as the new bios
|Device Id:|1002 687F|
|Subsystem Id:|1002 0B36|
same number on your and on my bios…
i go testing your settings now …
i use this bios “Sapphire.RXVega56.8176.170811.rom” vega is 56 with 56 bios…
with this settings:
amdmemtweak --CL 20 --RC 37 --RP 11 --WR 14 --CWL 8 --FAW 12 --RAS 20 --REF 65535 --RFC 248 --RTP 5 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 12 --RCDWR 12
and get 49 mhs its first card.
should i change “gen3” my code is now “gen2”
gen 2 should be fine, what miner are you using seems to be problem here.
Use the latest teamreadminer 0.8.6.2, if you’re already on that one I really have no idea what’s going on with that card…
from “run command” run amd-info and check your clocks
remove any display cables if you have connected to the card
I have a problem, I constantly get disabled share, after I put the bios from 56 to 64 …
you mean invalid share ?
from what I known usually people flash to 56 bios for their vega 64 card.
And for your invalid share usually you need to :
regards
Hi i put my vega 64 on vega 64 bios now with this settings:
amdmemtweak --CL 22 --RC 44 --RP 14 --WR 16 --CWL 7 --FAW 20 --RAS 33 --REF 65535 --RFC 248 --RTP 6 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 16 --RCDWR 10
And its stable without any invalid share 47,14 mhs
1100 / 850 / 1000 clocks…
can you tell me what settings in memorytweak raise mhs? what could be raised or lowered?
hello !!!
please can you help telling me how the hell you managed to make msi vega 56 hynix to 52 mhs ?
the best i did is 47mhs and i am suffering like a month .
if you vega memory card is samsung then you can use settings below :
amdmemtweak --CL 20 --RC 37 --RP 11 --WR 14 --CWL 8 --FAW 12 --RAS 20 --REF 65535 --RFC 248 --RTP 5 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 12 --RCDWR 12
if it’s hynix usually you can use below settings :
amdmemtweak --CL 20 --RC 37 --RP 11 --WR 14 --CWL 8 --FAW 12 --RAS 20 --REF 65535 --RFC 248 --RTP 5 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 18 --RCDWR 12
play with RC or RCDRD value, for hynix usually the value is much higher , you also can browse this thread from the top, many try to up their hynix memory performance but usually only achive average 47 MHS, 51-52 MHS if your are very lucky.
like I said , most people flash their vega 64 card using vega 56 bios (i also flash my vega 64 card to 56)
can you tell me why this chart is broken for me? does that mean anything or? do you perhaps know why this is so? it was overnight for me while I slept.
I’m having real trouble with the Vega 56 that you can see below here but it just won’t remain stable no matter what. I’ve managed to get it hashing as high as 47mh/s on some of the copied settings/straps that people have shared on here but no matter what I try it always ends up with the dreaded ‘GPU1 detected dead’ error.
I must have tried about 20 different configurations, even as you can see here just running it at stock (this attempt I’ve lowered just the VDD to troubleshoot if its a power issue) but it still keeps failing.
I’ve tweaked the autofan settings (as doing this has previoulsy helped stabalise other cards where I’ve had this isse), I’ve swapped risers, tried different PCI-E slots on the motherboard and done just about everything that I can think of.
Does anyone else have any suggestions as I’m really stumped here with this card? I know the Hynix’s are tempremental (I have other ones) but this particualr one is just the devil!!
chart is related to the hiveos api, it seem having a problem, this issue also happen to all of us. Already cheak my isp and it’s working fine
it’s seem you haven’t set the amdmemtweak oc
I have before, with multiple different varients of it, none of them stop the issue happening. Leaving it without any seems to be the most stable option but even that doesn’t help.
Are there any ultra low tweak settings that I can try just to test for stability?
would it also be worth re-flashing a bios (if so, which one would you recommend)?
