This is pool address where you want to mine RVN with exact port. If you have flightsheet for mining rvn you find it there. Check Server URLs
thanks a lot man. work good now
yep exactly thanks !
Thanks for the Info about the 24.2 version I just did thse command modified and it work! Have fun…
cd /hive/miners/t-rex/
mkdir 0.24.2
cd 0.24.2
wget https://github.com/trexminer/T-Rex/releases/download/0.24.2/t-rex-0.24.2-linux.tar.gz
tar -xzf t-rex-0.24.2-linux.tar.gz
cd …/0.24.0
mv t-rex t-rex.old
ln -s …/0.24.2/t-rex .
I have the same issue and I may be just dumb but how does one go about correcting inverted commas? I tried to type it out in a word doc while being able to see the proper orientation of the commas and then copy paste to hiveos but still get the same error.
is 0.24.2 not available on hive yet through system update? i just updated yet miner is still running 0.24.0 (i want to use the lhr-autotune-mode :D)
Hi,
By isolating the LRH cards on trex, I was able to get lhr to 37 without having any lock after 1 hour passed.
It’s still better than 30 
Regards
Jbsky
Ho great news I havent played wit it yet, but the 24.2 should try to optimise itself. I will try that to! If only we could see all Hasrate at the same time it would be easyer to tune… Can’t find a way to bind the adresse of the trex api since i am in Hiveos…
Yeah you can update it manually if you want using @nepius way with the update text I have post a few post higer…
1 Like
could you please re write the code again because this one is not working.
I could but hiveos just updated, its gona be easyer for all! Happy Dual Mining 
Yes they did still hanging with 3080 and 3070 ti Eth / RVN after try every code in earth i reach to :
Mining at eu1.ethermine.org:4444, diff: 4.29 G
GPU #0: RTX 3080 - 42.09 MH/s, [LHR 38<>] [T:43C, P:199W, F:70%, E:212kH/W], 12/12 R:0% I:0%
GPU #3: RTX 3070 Ti - 30.86 MH/s, [LHR 44<>] [T:46C, P:169W, F:70%, E:183kH/W], 6/6 R:0% I:0%
GPU #5: RTX 3080 - 40.23 MH/s, [LHR 44<>] [T:33C, P:199W, F:70%, E:202kH/W], 8/8 R:0% I:0%
Hashrate: 113.18 MH/s, Shares/min: 10.563 (Avg. 0.868), Avg.P: 567W, Avg.E: 200kH/W
Max diff share was found by GPU #5, diff: 199.21 G
Uptime: 30 mins | Algo: ethash | T-Rex v0.24.2
---------------------20211011 04:31:33 ---------------------
Mining at stratum-ravencoin.flypool.org:3333, diff: 431.17 M
GPU #0: RTX 3080 - 23.27 MH/s, [LHR 38<>] [T:43C, P:199W, F:70%, E:117kH/W], 62/62 R:0% I:0%
GPU #3: RTX 3070 Ti - 12.72 MH/s, [LHR 44<>] [T:46C, P:169W, F:70%, E:75.3kH/W], 27/27 R:0% I:0%
GPU #5: RTX 3080 - 16.93 MH/s, [LHR 44<>] [T:33C, P:199W, F:70%, E:85.1kH/W], 58/59 R:1.69% I:0%
Hashrate: 52.92 MH/s, Shares/min: 10.488 (Avg. 4.911), Avg.P: 567W, Avg.E: 93.3kH/W
Max diff share was found by GPU #3, diff: 125.53 G
Uptime: 30 mins | Algo: kawpow | T-Rex v0.24.2
better than before for sure.
Happy mining everyone
0.24.2 is now available with latest HiveOS!
Thank you for that.
HiveOS also updated for 0.24.2, how fast!
I tested it with my 3060ti LHR which produce 40mh/s stable on ETH. I used the same oc profile with ETH+RVN dual mine. However, I constantly get LHR lock. Still not sure why, have to play with it more today. Any suggestions would be appreciated.
This is what I have on 24.2.
Pools claim that the average hashrate last 4 hours for ETH is about 140MH and for CFX is 206 MH.
To me it looks great. 20 USD a day instead of 17 (246 MH ETH alone).
Do you have any calculations for ETH+RVN? Which combination works better and is RVN+ETH stable?
1 Like
Is there any way to change that [LHR 37 <>] mine is [LHR 25 <>] which makes eth hash rate too low. Any way to change that?
According to this:
try: “lhr-tune”: “0,0,71.5,0”
can you share your OC and kind of card using ? cause i have 3060ti asus and zotac, while i can get 130mh on ergo at 110 w i am not able to stabilize the ETH performances , it always reset …
tomorrow i will try this 24.2 with dual and check what happen…
It seems working stable with 3060ti lhs asus 900w at the wall Trex 24.2
conservative OC casue was crashing
18/19mh on eth
85mh on ergo
but if you check, the profitability is almost same as per the lhr 70% 40mh per card…
so i do not see any improvement in profit , except that i was not able to have the cards stable at 40mh … so i am satisfied , i will try to push OC to check is i can improve…