Noticed that the hashrate jumps to about 50 from 46.7 mining eth. Have to confess I have no idea how all the variables work, since this is my first amd card ever.
I did managed to get the values of amd-info during the last jump. Could the card do 50 Mh/s in a stable fashion? At 46 it is rather stable except for these sporadic spike for a few moments
This shows my card info, and I’m using lolminer
50 Mh/s
=== GPU 0, 03:00.0 Radeon RX 6700 XT 12272 MB ===
Bios: 113-D5121100-O02
Core: 1280 MHz 681mV, Mem: 1074 MHz
PerfCtrl: manual, Load: 99%, MemLoad: 45%, Power: 91.0 W, Cap: 115 W
Core: 53°C, HotSpot: 58°C, Mem: 74°C, Fan: 40%, RPM: 1353
Core state: 1, clocks: 500 1280*
Mem state: 3, clocks: 96 456 675 1074*
SOC state: 0, clocks: 872* 1200
DCEF state: 1, clocks: 417 480* 1200
F state: 1, clocks: 1551 1586* 1941
PCIE Link speed: n/a, PCIE Link width: n/a
Memory total: 12272.00 MB, used: 5787.04 MB, free: 6484.96 MB, type: Samsung GDDR6
46 Mh/s
=== GPU 0, 03:00.0 Radeon RX 6700 XT 12272 MB ===
Bios: 113-D5121100-O02
Core: 1280 MHz 687mV, Mem: 1074 MHz
PerfCtrl: manual, Load: 99%, MemLoad: 45%, Power: 91.0 W, Cap: 115 W
Core: 53°C, HotSpot: 58°C, Mem: 74°C, Fan: 40%, RPM: 1353
Core state: 1, clocks: 500 1280*
Mem state: 3, clocks: 96 456 675 1074*
SOC state: 1, clocks: 872 960* 1200
DCEF state: 1, clocks: 417 600* 1200
F state: 1, clocks: 1551 1645* 1941
PCIE Link speed: n/a, PCIE Link width: n/a
Memory total: 12272.00 MB, used: 5787.04 MB, free: 6484.96 MB, type: Samsung GDDR6