Hi guys,
can someone help me with this?
no address specified - ignore
ETH: 1 pool is specified
Main Ethereum pool is eu1.ethermine.org:14444
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press “s” for current statistics, “0”…“9” to turn on/off cards, “r” to reload pools, “e” or “d” to select current pool, “x” to select GPU, “z” to find best -dcri values
OpenCL initializing…
AMD Cards available: 4
GPU #0: Ellesmere (Radeon RX 580 Series), 4013 MB available, 36 compute units (pci bus 2:0:0)
GPU #0 recognized as Radeon RX 480/580
GPU #1: Ellesmere (Radeon RX 580 Series), 4056 MB available, 36 compute units (pci bus 4:0:0)
GPU #1 recognized as Radeon RX 480/580
GPU #2: Ellesmere (Radeon RX 580 Series), 4056 MB available, 36 compute units (pci bus 5:0:0)
GPU #2 recognized as Radeon RX 480/580
GPU #3: Ellesmere (Radeon RX 580 Series), 4056 MB available, 36 compute units (pci bus 6:0:0)
GPU #3 recognized as Radeon RX 480/580
POOL/SOLO version
AMD ADL library not found.
GPU #0: algorithm ASM 1
GPU #1: algorithm ASM 1
GPU #2: algorithm ASM 1
GPU #3: algorithm ASM 1
No NVIDIA CUDA GPUs detected.
Total cards: 4
ETH: Stratum - connecting to ‘eu1.ethermine.org’ <46.105.121.53> port 14444 (unsecure)
ETH: Stratum - Connected (eu1.ethermine.org:14444) (unsecure)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
“-allpools” option is set, default pools can be used for devfee, check “Readme” file for details.
“-allcoins” option is set, default pools will be used for devfee, check “Readme” file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Share rejected!
GPU0 t=34C fan=80%, GPU1 t=33C fan=80%, GPU2 t=28C fan=80%, GPU3 t=26C fan=80%
ETH: Job timeout, disconnect, retry in 20 sec…
