More
referral
Increase your income with Hive. Invite your friends and earn real cryptocurrency!

S19 trouble with new firmware!, i need help!

Hi, im triying to run on a sd card the new firmware of hiveos in my s19, i downloaded the xilinx 19 image and the s19 boot perfect, but the kernell log shows me ERROR POWER LOST.

i need help. Thank You!

have you tried reinstalling? at what point does it show that in the kernel log?

hi i show you the log

[ 0.000000] Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 196300K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 33076K reserved, 16384K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc090e410 (9242 kB)
[ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0b3cda0 ( 244 kB)
[ 0.000000] .bss : 0xc0b3cda0 - 0xc0b77024 ( 233 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] efuse mapped to cf800000
[ 0.000000] ps7-slcr mapped to cf802000
[ 0.000000] L2C: platform modifies aux control register: 0x72360000 → 0x72760000
[ 0.000000] L2C: DT/platform modifies aux control register: 0x72360000 → 0x72760000
[ 0.000000] L2C-310 erratum 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
[ 0.000000] zynq_clock_init: clkc starts at cf802100
[ 0.000000] Zynq clock init
[ 0.000010] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
[ 0.000028] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
[ 0.000051] Switching to timer-based delay loop, resolution 3ns
[ 0.000290] clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
[ 0.000315] ps7-ttc #0 at cf80a000, irq=18
[ 0.000614] Console: colour dummy device 80x30
[ 0.000629] Calibrating delay loop (skipped), value calculated using timer frequency… 666.66 BogoMIPS (lpj=3333333)
[ 0.000642] pid_max: default: 32768 minimum: 301
[ 0.000777] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000786] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001394] CPU: Testing write buffer coherency: ok
[ 0.001596] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001656] Setting up static identity map for 0x100000 - 0x100058
[ 0.100278] CPU1: failed to boot: -1
[ 0.100310] Brought up 1 CPUs
[ 0.100319] SMP: Total of 1 processors activated (666.66 BogoMIPS).
[ 0.100325] CPU: All CPU(s) started in SVC mode.
[ 0.101103] devtmpfs: initialized
[ 0.103363] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.103780] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.104742] pinctrl core: initialized pinctrl subsystem
[ 0.105876] NET: Registered protocol family 16
[ 0.107708] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.150230] cpuidle: using governor menu
[ 0.159403] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.159414] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.159560] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
[ 0.211364] vgaarb: loaded
[ 0.211702] SCSI subsystem initialized
[ 0.211985] usbcore: registered new interface driver usbfs
[ 0.212053] usbcore: registered new interface driver hub
[ 0.212488] usbcore: registered new device driver usb
[ 0.213006] media: Linux media interface: v0.10
[ 0.213118] Linux video capture interface: v2.00
[ 0.213281] pps_core: LinuxPPS API ver. 1 registered
[ 0.213289] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [email protected]
[ 0.213369] PTP clock support registered
[ 0.213537] EDAC MC: Ver: 3.0.0
[ 0.220613] Advanced Linux Sound Architecture Driver Initialized.
[ 0.230630] clocksource: Switched to clocksource arm_global_timer
[ 0.249422] NET: Registered protocol family 2
[ 0.250425] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.250461] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.250504] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.250552] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.250772] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.250978] NET: Registered protocol family 1
[ 0.261308] RPC: Registered named UNIX socket transport module.
[ 0.261316] RPC: Registered udp transport module.
[ 0.261321] RPC: Registered tcp transport module.
[ 0.261326] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.261353] PCI: CLS 0 bytes, default 64
[ 0.261571] Trying to unpack rootfs image as initramfs…
[ 0.262162] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 0.393187] Freeing initrd memory: 20004K (cc770000 - cdaf9000)
[ 0.393584] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 0.395352] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.407041] workingset: timestamp_bits=28 max_order=16 bucket_order=0
[ 0.417880] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.418961] io scheduler noop registered
[ 0.418976] io scheduler deadline registered
[ 0.419004] io scheduler cfq registered (default)
[ 0.420977] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
[ 0.420992] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.421946] e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
[ 0.924395] console [ttyPS0] enabled
[ 0.927264] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[ 0.933439] [drm] Initialized drm 1.1.0 20060810
[ 1.110764] brd: module loaded
[ 1.199664] loop: module loaded
[ 1.206446] CAN device driver interface
[ 1.210690] gpiod_set_value: invalid GPIO
[ 1.214328] libphy: MACB_mii_bus: probed
[ 1.290710] macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
[ 1.299154] Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
[ 1.309463] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.314004] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.319833] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.325442] ehci-pci: EHCI PCI platform driver
[ 1.328747] usbcore: registered new interface driver usb-storage
[ 1.335268] mousedev: PS/2 mouse device common for all mice
[ 1.350627] i2c /dev entries driver
[ 1.353463] cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
[ 1.361431] Xilinx Zynq CpuIdle Driver started
[ 1.365682] sdhci: Secure Digital Host Controller Interface driver
[ 1.370470] sdhci: Copyright(c) Pierre Ossman
[ 1.373629] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.410785] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.424946] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.432296] usbcore: registered new interface driver usbhid
[ 1.438553] usbhid: USB HID core driver
[ 1.449573] nand: disable subpage write
[ 1.452187] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.457181] nand: Micron MT29F2G08ABAEAWP
[ 1.459866] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.466132] nand: NAND_ECC_HW
[ 1.467737] nand: NAND_ECC_HW_SYNDROME
[ 1.470170] mtd->writesize = 2048
[ 1.472252] ecc->strength = 1
[ 1.473852] ecc->size = 2048
[ 1.475411] mtd->writesize = 2048
[ 1.477418] chip->ecc_strength_ds = 4
[ 1.479752] chip->ecc_step_ds = 512
[ 1.481961] nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
[ 1.492131] Bad block table found at page 131008, version 0x01
[ 1.497074] Bad block table found at page 130944, version 0x01
[ 1.501869] nand_read_bbt: bad block at 0x000002420000
[ 1.505652] nand_read_bbt: bad block at 0x000002440000
[ 1.509471] nand_read_bbt: bad block at 0x000002460000
[ 1.513437] 8 ofpart partitions found on MTD device pl35x-nand
[ 1.517959] mmc0: new high speed SDHC card at address 0001
[ 1.522516] Creating 8 MTD partitions on “pl35x-nand”:
[ 1.526265] 0x000000000000-0x000002800000 : “BOOT.bin-dts-marker-kernel”
[ 1.532665] mmcblk0: mmc0:0001 SD16G 14.6 GiB
[ 1.537748] mmcblk0: p1
[ 1.543124] 0x000002800000-0x000004800000 : “ramfs”
[ 1.558156] 0x000004800000-0x000005000000 : “configs”
[ 1.573239] 0x000005000000-0x000005200000 : “sig”
[ 1.587885] 0x000005200000-0x000006000000 : “reserve1”
[ 1.603091] 0x000006000000-0x000007000000 : “upgrade-ramfs”
[ 1.618642] 0x000007000000-0x00000a800000 : “upgrade-file”
[ 1.634447] 0x00000a800000-0x000010000000 : “reserve2”
[ 1.652951] nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
[ 1.658249] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.662946] NET: Registered protocol family 10
[ 1.677070] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.681360] sit: IPv6 over IPv4 tunneling driver
[ 1.685508] NET: Registered protocol family 17
[ 1.688577] can: controller area network core (rev 20120528 abi 9)
[ 1.693683] NET: Registered protocol family 29
[ 1.696752] can: raw protocol (rev 20120528)
[ 1.699696] can: broadcast manager protocol (rev 20120528 t)
[ 1.704094] can: netlink gateway (rev 20130117) max_hops=1
[ 1.708485] zynq_pm_ioremap: no compatible node found for ‘xlnx,zynq-ddrc-a05’
[ 1.714444] zynq_pm_late_init: Unable to map DDRC IO memory.
[ 1.718793] Registering SWP/SWPB emulation handler
[ 1.724222] hctosys: unable to open rtc device (rtc0)
[ 1.728210] ALSA device list:
[ 1.729787] No soundcards found.
[ 1.732588] RAMDISK: gzip image found at block 0
[ 4.012317] EXT4-fs (ram0): couldn’t mount as ext3 due to feature incompatibilities
[ 4.029429] EXT4-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended
[ 4.036659] EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
[ 4.042487] VFS: Mounted root (ext4 filesystem) on device 1:0.
[ 4.047372] devtmpfs: mounted
[ 4.051802] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
[ 4.237020] EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
[ 4.263462] random: dd urandom read with 2 bits of entropy available
[ 4.313510] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 4.411823] ubi0: attaching mtd2
[ 4.443073] ubi0: scanning is finished
[ 4.451433] ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 4, need 40
[ 4.460522] ubi0: attached mtd2 (name “configs”, size 8 MiB)
[ 4.464988] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.470471] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.475988] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.481620] ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
[ 4.486182] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 4.492117] ubi0: max/mean erase counter: 5/3, WL threshold: 4096, image sequence number: 853304230
[ 4.499810] ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
[ 4.507578] ubi0: background thread “ubi_bgt0d” started, PID 738
[ 4.520642] UBIFS (ubi0:0): background thread “ubifs_bgt0_0” started, PID 741
[ 4.558698] UBIFS (ubi0:0): recovery needed
[ 4.620635] UBIFS (ubi0:0): recovery completed
[ 4.623694] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name “config_data”
[ 4.630203] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 4.639643] UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[ 4.648390] UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
[ 4.653505] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID B303FC80-8A5E-421A-9DBE-7A61221E2C57, small LPT model
[ 4.685986] ubi1: attaching mtd5
[ 4.724843] ubi1: scanning is finished
[ 4.727223] ubi1 error: ubi_read_volume_table: the layout volume was not found
[ 4.733196] ubi1 error: ubi_attach_mtd_dev: failed to attach mtd5, error -22
[ 5.911697] ubi1: attaching mtd5
[ 5.974448] ubi1: scanning is finished
[ 5.985328] ubi1: attached mtd5 (name “upgrade-ramfs”, size 16 MiB)
[ 5.990210] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.995882] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 6.001321] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 6.006918] ubi1: good PEBs: 128, bad PEBs: 0, corrupted PEBs: 0
[ 6.011644] ubi1: user volume: 0, internal volumes: 1, max. volumes count: 128
[ 6.017509] ubi1: max/mean erase counter: 0/0, WL threshold: 4096, image sequence number: 516843184
[ 6.025266] ubi1: available PEBs: 84, total reserved PEBs: 44, PEBs reserved for bad PEB handling: 40
[ 6.033174] ubi1: background thread “ubi_bgt1d” started, PID 751
[ 6.064353] UBIFS (ubi1:0): default file-system created
[ 6.074641] UBIFS (ubi1:0): background thread “ubifs_bgt1_0” started, PID 756
[ 6.122401] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name “reserve1”
[ 6.128589] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 6.137241] UBIFS (ubi1:0): FS size: 9396224 bytes (8 MiB, 74 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[ 6.145980] UBIFS (ubi1:0): reserved for root: 443806 bytes (433 KiB)
[ 6.151107] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 04AA5079-EA9D-43A6-999F-A3D27EBDFCCA, small LPT model
[ 6.860094] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.888044] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.290771] macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
[ 7.297570] macb e000b000.ethernet eth0: link up (100/Full)
[ 7.302420] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.340780] In axi fpga driver!
[ 23.343853] request_mem_region OK!
[ 23.347253] AXI fpga dev virtual address is 0xcfb90000
[ 23.390708] *base_vir_addr = 0xb031
[ 23.430733] In fpga mem driver!
[ 23.433805] request_mem_region OK!
[ 23.437393] fpga mem virtual address is 0xd2000000
2022-07-14 22:32:01 driver/thread.c:2368:create_restart_monitor_thread: create thread
2022-07-14 22:32:01 driver/driver-btm-api.c:300:init_freq_mode: This is scan-user version
2022-07-14 22:32:01 driver/driver-btm-api.c:2089:bitmain_soc_init: opt_multi_version = 1
2022-07-14 22:32:01 driver/driver-btm-api.c:2090:bitmain_soc_init: opt_bitmain_ab = 1
2022-07-14 22:32:01 driver/driver-btm-api.c:2091:bitmain_soc_init: opt_bitmain_work_mode = 0
2022-07-14 22:32:01 driver/driver-btm-api.c:2092:bitmain_soc_init: Miner compile time: Mon May 30 12:01:39 UTC 2022 type: Antminer S19 Hiveon
2022-07-14 22:32:01 driver/driver-btm-api.c:2094:bitmain_soc_init: commit version: 0c32fe9 2022-05-27 15:29:33, build by: root 2022-05-27 18:07:38
2022-07-14 22:32:01 driver/driver-btm-api.c:1470:show_sn: no SN got, please write SN to /nvdata/sn
2022-07-14 22:32:01 driver/fan.c:247:front_fan_power_on: Note: front fan is power on!
2022-07-14 22:32:01 driver/fan.c:253:rear_fan_power_on: Note: rear fan is power on!
2022-07-14 22:32:01 driver/driver-btm-api.c:1526:miner_device_init: Detect 256MB control board of XILINX
2022-07-14 22:32:01 driver/driver-btm-api.c:1498:init_fan_parameter: fan_eft : 0 fan_pwm : 100
2022-07-14 22:32:07 driver/driver-btm-api.c:1196:init_miner_version: miner ID : 8162a4890dfaa85c
2022-07-14 22:32:07 driver/driver-btm-api.c:1201:init_miner_version: FPGA Version = 0xB031
2022-07-14 22:32:07 driver/thread.c:2378:create_read_nonce_reg_thread: create thread
2022-07-14 22:32:07 driver/driver-btm-api.c:1311:bitmain_board_init: project:0
2022-07-14 22:32:15 driver/driver-btm-api.c:1339:bitmain_board_init: Fan check passed.
2022-07-14 22:32:16 driver/board.c:31:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2022-07-14 22:32:20 driver/board.c:34:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x89
2022-07-14 22:32:21 driver/board.c:31:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2022-07-14 22:32:25 driver/board.c:34:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x89
2022-07-14 22:32:25 driver/board.c:31:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2022-07-14 22:32:30 driver/board.c:34:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x89
2022-07-14 22:32:30 driver/thread.c:2363:create_temperature_monitor_thread: create thread
2022-07-14 22:32:32 driver/thread.c:2373:create_pic_heart_beat_thread: create thread
2022-07-14 22:32:32 driver/power_api.c:99:power_init: power init …
2022-07-14 22:32:33 driver/driver-btm-api.c:216:set_miner_status: ERROR_POWER_LOST
2022-07-14 22:32:35 driver/power_api.c:88:power_off: init gpio907
2022-07-14 22:32:36 driver/driver-btm-api.c:733:killall_hashboard: power off hashboard
2022-07-14 22:32:36 driver/driver-btm-api.c:169:stop_mining: stop mining: get power firmware version failed!
2022-07-14 22:32:36 driver/thread.c:2429:cancel_temperature_monitor_thread: cancel thread
2022-07-14 22:32:36 driver/thread.c:2444:cancel_read_nonce_reg_thread: cancel thread

2022-07-14 22:32:15 driver/driver-btm-api.c:1339:bitmain_board_init: Fan check passed.
2022-07-14 22:32:16 driver/board.c:31:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2022-07-14 22:32:20 driver/board.c:34:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x89
2022-07-14 22:32:21 driver/board.c:31:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2022-07-14 22:32:25 driver/board.c:34:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x89
2022-07-14 22:32:25 driver/board.c:31:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2022-07-14 22:32:30 driver/board.c:34:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x89
2022-07-14 22:32:30 driver/thread.c:2363:create_temperature_monitor_thread: create thread
2022-07-14 22:32:32 driver/thread.c:2373:create_pic_heart_beat_thread: create thread
2022-07-14 22:32:32 driver/power_api.c:99:power_init: power init …
2022-07-14 22:32:33 driver/driver-btm-api.c:216:set_miner_status: ERROR_POWER_LOST
2022-07-14 22:32:35 driver/power_api.c:88:power_off: init gpio907
2022-07-14 22:32:36 driver/driver-btm-api.c:733:killall_hashboard: power off hashboard
2022-07-14 22:32:36 driver/driver-btm-api.c:169:stop_mining: stop mining: get power firmware version failed!
2022-07-14 22:32:36 driver/thread.c:2429:cancel_temperature_monitor_thread: cancel thread
2022-07-14 22:32:36 driver/thread.c:2444:cancel_read_nonce_reg_thread: cancel thread