on drivers 5.11 you need to use nbminer v39.1 and this settings
It’s enough. I also have 4 and also a flash drive for 32
1 Like
Ok.
But why i have LA above 3.x it is to high.
Also the problem with fans is still here.
Ok. Thanks.
i will try it just now and inform
I think all must be okay
OK.
I have much more trouble than i expected.
first command hive-replace -y --stable take to long
second i find that if i use ssd instead flash i get better LA results
third i still have problem that autofan don’t work - all card starts and remain at 0% fan thus temps goes high.
forth NB miners 39.1 which is the latest version don’t load DAG file correctly for some cards and that cards report hash rate but don’t mine at all or makes invalid and rejected
this is what i can read at console
Blockquote Device 5: DAG - Verification failed, invalid 1.0%.
Blockquote
Hello Miners,
Thanks to @prosperity i find best settings for my 6700xt rig. And it works stable.
and
Rig have consumption from wall about 710w.
2 Likes
Good news! I very glad to see that! We did it!
1 Like
yes we did
1 Like
Did you find a way to mod bios in HiveOS? My 6700 XT does 47MH at 80 watts in Windows.
Still no bios mod for 6700/6800xt ?
There is another thread that goes into ocing for the 6700
You should be able to do better than 46 Mh/s around 68W. Not sure how all the miners compare. TRM gives good results. Was using TBM but had too many invalids
Don’t think you need to mod the card. Hive let you use almost any oc without issues
46.5 is about right. Assuming you are mining ETH, why risk bricking your GPU with 19 days left of mining for 0.3MH/s? Any gain will be lost in the downtime screwing around with the GPUs.
Not sure what but after ETH ill probably will be mining something else and higher OC would come in handy either way
This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.