There are 2 rx 6600s in the rig, one gives MH but the other does not. note : i am a beginner
show the full worker overview screen
Open the miner in shell and see what it says about the card, any errors etc.
Does the card for sure work? Are you able to get display output from the card?
Also, looks like you have multiple miners, is your config set to use the second 6600?
Card is Clear but maybe I make wrong settings. I took out the rx 6600 that was digging and only plugged the rx6600 that didn’t give MH. MH did not give 6600 worked correctly MH gave. but they cannot dig at the same time. one gives MH and the other does not
What did the miner say? Post a screenshot of your flight sheet
You have 5 cards, you’re telling nbminer to use 3 of them.
1 Like
Yes true
Get it fixed?
1 Like
unfortunately still the same. I can’t get MH.
Did you change your config? If not it’s not going to use a card you’re telling it not to use.
1 Like
Dear Friend keaton_hiveon
Thank you son much. you were right. The problem is configuration.
1 Like
This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.