gonna try your setting, thank you
which version of nbminer do you use?
v 38.1
How is your temperature so low? My 3070 ti reaches 71 - 72 d celcius while mining rvn
I haven’t done anything in particular. Just the oc settings above and good ventilation and ambient temperature
I just added a second 3070 ti mining RVN and have been getting a 99.9% efficiency using the following OC settings. Also updating HIVEOS to 0.6-205@210719.
Core : 1530
MEM: 2700
Pl: 250
40.6 mhs
56-58 degrees C
gminer,flypool
Hi!
I’m having the same problem as you with my 3070 Ti… it starts mining at 40MH/s on RVN, and a couple of minutes later it drops to 35MH/s…
I’ve tried different OC configs, miners and updated the driver version, but nothing works…
I’ve noticed that the Core Clock goes all the way down to 1110Mhz, and the power usage to 230W, even using absolute core clock and no power limits.
Did you find out anything about that problem?
Same here, my Zotac Trinity mining about 39,9 and somethimes it drop to 36-37 is it mean that its thermal throtle ? i cant check my memory temp(hiveos) oc 1500,2200,250 Autofan 59s(min fan speed 71)
any ideas ? is it thermal throtling or bad oc?, anyway when i touch backplate its hot(i can hold a finger about 2seconds) is ur backplate also that hot?
I have this same guys.
I`ll try now nbminer.
EDIT: for last 13 minutes it seems to be OK
Just simple question. Who of us uses dummy plug ??
I do not.
What about ur backplate?
I dont use any hdmi dummy
My backplate is HOT
after few tweaks, and running NBminer, i`m having stable 39.1 for 245W.
220/2200/245
If your gpu low performance it is due to heat in the memory junctions.
You must replace thermal paste and heating pads.
With that it keeps the hashrate continuous and gpu more stable
Hi guys,i buy 4x3070ti aorus,in friday arriving to my home,i need some settings for those,can someone share?
Clock,memory,Pl
I using 1500/2350 PL one 262 second 240
Stable 40mhs/each but i had to instal radiator and cooler on a backplate to cooldown memories, its cheaper than replacing thermal pads
I try it tommorow mine,guys how much power yours gpu need?
Mine need 2*8pin+6pin and have huge cooling system
My card is mining at 46,7 Mhs. Using T-rex for ETH.
Fan 70%
Mem -200
Clock 3400
Power 180W
No rejected shares and temp around 50.
See you!
Printscreen pls to see that.
Now it’s abit better… Changing miner to nbminer 39.2 we are getting 52 MHS in ETH mining. See below:
Hello, i could get 54-55 in ETH in my 3070 TI Cards using nbminer 39.2, Just switched 1 to RVN because i want to avoid Gas Fee on Ethermine, but you can see a clear diffence on consumption and heat.
is it the asus TUF? do you need to reapply the new thermal
paste? I applied new thermal paste for mine yesterday and temperature of core and hotspot increased. The temp for vram decreased but it still reach 105 after maximum overclocking