Hello José,
i Hope u’ll read my message
I found better oc settings
GPU 0 maximum memory is 2300 and hashrate highly decrease when i set to 2400
Others GPU are fine at 2400 and maybe i can increase ( might be the “lottery” )
I stick with this settings 1 day or 2 to see the stability
You can improve those settings by increasing memory clock +100 each time and see what happened
Hope this will help
Regards
Lee
Also, what’s your miner :)?
nbminer, no additional scripts
Latest version of nbminer? And you started with those settings on? By the way we are from the same country 
nbminer v.39.6
Ti-am scris si in particular !
I found on internet Rtx 3070 ti mining oc : core -200; memory 2600
Might be better for you ?
Hi Lee,
Thank for your info.
My hasrate is now better, Here is my setup:
At this moment I’m ok with this setup. 
Regards
José
Hi José,
Thanks for your settings they worked for me.
Is it risky to set the momery to “3200” ??
Thanks
Regards
Hi, the temp of GPU is nice, and this GPU never crashed in fact this GPU is the most stable of them. No others gpu andle with this setup, the two others gpu 3080 ti crashed mutch soon. This GPU is special (I hope ).
Sorry for my poor English
Regards
I Think you have too much temp °C in you GPUs, I read somewere that temp more than 50°C is equal more than 100°C at memory pads. I will put AC to cool down temp. You should do the same.
Regads
I have indeed error message probably due to the temperature.
Ty for ur message i’ll try to cool down with an AC.
Regards
Hello,
I bought an Rtx 3080 TI Gigabytes Vision a week ago and I am starting to mine. I use Windows and when trying to balance the values to get a better result, I can’t keep the card mining in a balanced way and with the expected Hashrate! I always have values around 56 and 60 MH/s. I don’t know what else to do to reach 84, just like you and just like I see on your printscreens!
Any tips?
Best regards
Hello,
Can u tell us which software are you using, drivers , oc settings, pool… ?
Sure! I am using NBminer, pooling on Binance and on OC I have -200 on core clock, +1200 on memory clock, 85 on power limit and 80 on fan speed. For drivers and downloaded for the internet the latest update and just installed it!
Maybe you can try with T-Rex with lhr rate 73.5
Oc settings: core 1150 mem 2350 and try to increase it to 3100 +50/100 each time if it works
Or core 1320 mem 3100
PL 290
If this doesn’t work you can try to increase your fan to 100% this could fix your issue
My bad i use those settings on hiveos so i dont think this could work on Windows
Do you recomend me to change to hiveos?
Yeah this could be better, you have Access on your phone and anyway no one should mine on computer with personal data so you should run on hiveos
