paylasım hatası alıyor musun pekı bu sekılde ? guzel deger vermıs
daniel, how do you get to those numbers e.g. which are the values you start off with and then what kind of increments do you use? also what is your ambient temp?
i switched from phoenix to trex and got a nice boost in terms of hash rate and lower consumption
this is insane, how do you keep it at 36C?
Uploading: last11.png…
paylasım hatası almıyor hocam sadece internet gıderse alıyor gunde 1 2 alıyor max oda superbox ile oldugu ıcın.
paylasım hatası almıyor hocam sadece internet gıderse alıyor gunde 1 2 alıyor max oda superbox ile oldugu ıcın.
1 Like
deneyecegım hocam tesekkur ederım -500 2200 130w yapınca ben 58 mhs alıyorum sınır oldum kac gundur ugrasıyorum cozemedım
hello i have asus tuf and msı gaming x trio cards. but I have problems with overclock settings. can you check it and write what is most suitable for me? thanks in advance.
I get about 63.1 MHs with these settings on EVGA 3070 XC3 Ultra
hi,i am a new miner,only try mining about 2 weeks, this is my overlock give me an advice, thanks, too hot 53-57° .
GPU 0
GeForce RTX 3070 7982 MB · Gigabyte
Samsung GDDR6 · 94.04.3A.40.DB · PL 100 W, 270 W, 270 W
63.49 Mhs 53° 75% 75 -502 2900 132w
GPU 1
GeForce RTX 2070 7979 MB · MSI
Micron GDDR6 · 90.06.0B.40.12 · PL 112.5 W, 225 W, 250 W
43.63 MHs 46° 75% 75 -200 2050 126w
hi there how you can get 33° ? i got this :
GeForce RTX 3070 7982 MB · Gigabyte
Samsung GDDR6 · 94.04.3A.40.DB · PL 100 W, 270 W, 270 W
63.49 Mhs 53° 75% 75 -502 2900 132w
I start the rig, stop the miner, change the setting to the ones with 117w to all the 3070s and than hard boot the rig again.
After the I check with ones will get those number and change the others to spend more power.
I’m in Brazil, today we have 30ºC as ambient temp
Those are my settings now
You can really lower your temps a lot by trying this:
This is also at 30C ambient or higher.
Your core voltage is way too high for no good reason. Drop it and then you can drop voltage significantly - hopefully if you have a good gpu model.
This is EVGA 3070 XC Ultra.
1 Like
fans were set to 0 in OC template and temps from 50 -55…turned on Autofan and now all fans in the Red but temps are down to 45…however hash is the same.
Setting at -500, 2400, pw @ 125…100% eff hash at 369 for 6 cards and noticed my LA reading now in the red???
I was reading this post and did a chance to what the guys were talking
They ( rul3s and j2h4u ) fixed the core clock, first by command line e than by hiveos console (after updating for the lastest version)
From rul3s:
On my research I’ve found that manually setting core clock is much better than setting a power limit to the card.
They basically use the command “nvidia-smi -lgc 1150” to set the maximum and minimum core clock.
I did the same and now I can get 62 Mh/s in each 3070
They tried the core clock at 900, 1075, 1150 and 1155. I don’t know which one is the best, still looking to see what happens but looks promising
What do you think guys, let me know if it is working for you as well
3 Likes
WOW! This is huge!
My 6 cards dropped 60 watts while remaining same speed with 1100!!
THX for posting
2 Likes
Hey man, what about the efficiency? Do you have some invalids and stuff?
1 Like
No invalid shares so far. Efficiency skyrocketed on some cards.
1100 or 1075 seem to make no difference. 900 dropping hashrate to 60.
Now i know which is the worst of my cards GPU4.
4 Likes
from this image looks like your core clock is at 1080 actually
Nbminer running for 11 hours, I’m getting some rejected shares but none of them are invalid. Running last stable hiveos version with the latest nvidia driver
I’m limiting the power for each card. (each of my cards behave differently)
1 Like
It’s set to 1075
i guess it has 0 effect. try all @130