Hey Westy. Are those ti’s OC gaming cards? I’m running 1600 core & 2600 mem. Tested for 72 hrs. Start at 46, then they drop to 45 and change. What are you seeing?
I have some EVGA ftw3 ultra 3060 ti’s that are LHR with Hynix memory. With NBminer 39.7 and up-to-date drivers, I’m getting 44-45 mh per card with 1410 core, 2150 memory, no PL. Been stable since the 39.7 update, no crashes.
Also: make sure you have updated the HiveOS to at least the version that includes the NBminer update
Same here. Running 470.74. Cards start at 46.5 then over 24-48 hrs slow to 45.5. OC set at 1600/2600/150. Are you seeing the same thing over time. A reboot gets the hash rate back up, but I don’t think I should have to do that every day. Thoughts? Driver change or OC change?
I tried till Mem 1790, core 1100, PL 145. After mem 1800 its becoming unstable. I am back to Nbminer 38.1 just to see if my hardware is stable. Worked well for 36hrs but then 1 gpu is giving problem. Goes offline abruptly with mem oc error / cuda error. Need to check if its gpu issue or riser or cable or the miner. Will check that day after tomorrow. Currently working without that gpu
Very good results with Hynix memory!!
I tried these settings right now and I think it’s stable (I think) at 44mh/s!! Thanks man… If you improve a little more, please let me know. Consuming 132w to 145w… A little high, but thats ok.
I bought 6 3060ti and all of them are Hynix!
With those settings (1410 core, 2150 memory, no PL) each of my cards range from 125-140 watts. They seem to stay in the 130~ range for the most part, but occasionally spike higher. They have never past 140 watts though, and the spikes only last like 5 seconds before coming back down towards 130w. So far, my OC settings for these 3060 ti’s w/ Hynix memory seem to be the perfect balance to keep a stable 44-45 mh per card after this 39.7 NBminer update
Yep… Very good oc indeed. Have you tried to get a little bit more?
Mine sit on 46.6 on NBMINER
I’ve tried, going any higher/lower on the memory usually ends up dropping the hashrate a little. Same with moving the core
1 Like
Sounds like you have Samsung memory. We’re talking about ones with Hynix memory
Yeah, same here!!
Collapsed
ok … I have figured the 3060TI actually works pretty well with the VNIDIA 495 driver and the 39.7 NBMINER software with an older Hiveos version.
0.6-208@210818
seems to hold on and become pretty stable.
is stable so far?
Yes it is. still getting 47.37 mh on Nbminer 39.7 using Nvidia driver 470.82.00
I read that for hynix memory cards we use negative memory clocks… have u tried that?
Can you give the setting OC, driver version and version hiveos, because i have 3 gpu 3060ti lhr with hynix memory, with nbminer 39.6 just stable on 40-41 mh/s